Project Print Lab
ProjectPrintLab88 followers
Follow
ProjectPrintLab
ProjectPrintLab
|
Image 1 of 8
Meridian Wall Clock 3d model
ProjectPrintLab
ProjectPrintLab
|
Image 1 of 8
Meridian Wall Clock 3d model
Meridian Wall Clock video thumbnail
Meridian Wall Clock 3d model
Meridian Wall Clock 3d model
Meridian Wall Clock 3d model
Meridian Wall Clock 3d model
Meridian Wall Clock 3d model
Meridian Wall Clock 3d model
Meridian Wall Clock 3d model
Meridian Wall Clock 3d model

Meridian Wall Clock

Subscribe for access starting at $50 USD
Get access to this model and many more
This model is restricted by licensing terms. 

The Meridian is a fully functional wall clock and a warm, ambient wall light — two things you didn't know could live together this well.

During the day, the Meridian's bold face and retro-modern silhouette make a statement on their own. At night, flip it on and the clock face comes alive, casting a warm, intimate glow that turns any wall into a focal point.

The clock face bodies attach to the main housing via 10x3mm magnets, and the faces themselves slide in and swap out in seconds — making it effortless to change up your look whenever you want.

Additional clock face styles coming soon!

Mounted using the DZN wall mount system, the Meridian installs in minutes with no hardwiring required — just hang, plug in, and set the time.

  • Clock center frame slices and attaches to the base with dovetails.
  • Clock bodies have push through holes to easily remove magnets if polarity is accidentally swapped.
  • Clock sides attach to the center frame using (4) 10x3mm magnets each
  • Mounts to the wall using the DZN Wall Mount used in all DZNFORPPL sconces

Post Processing

  • Attach (16) 10x3mm magnets to clock sides (same polarity for both sides) and center frame (opposite polarity from clock sides)
  • Recommended Model for Magnet Install Use the 10x3 model.
  • Snip built-in supports to allow for clock faces to slide in to clock sides.
  • Press in bubble level to wall mount for hanging accuracy
  • Optional - Press in M3 thread inserts for center frame

Dimensions: 10.5" W × 4.5" H × 5.5" D (266mm × 114mm × 140mm)

Required Parts: (2) quartz clock movements Cost ~$6.50 USD (1) 8 ft E26 plug-in cord w/ socket Cost ~$4.00 USD (1) 6W 2700K Edison tube bulb Cost ~$6.00 USD (2) 8-10 screw and wall anchors Cost ~$0.30 USD (2) AA batteries Cost ~$2.00 USD (16) 10x3mm Magnets Cost ~$2.70 USD (1) M3 12mm Screw Cost ~$0.02 USD (1) M3-0.5mm hex nut Cost ~$0.03 USD (1) 6x20mm Bubble level Cost ~$0.10 USD

Optional Parts (2) Ruthex M3 Thread inserts Cost ~$0.20 USD (2) M3 18mm screws Cost ~$0.02 USD

Total for Parts ~$22

All parts available though my Amazon Shop or direct links above


Discussions

Meridian Wall Clock

6 downloads · 3 months ago in  and 
Project Print Lab
ProjectPrintLab88 followers
Follow
Subscribe for access starting at $50 USD
Get access to this model and many more
This model is restricted by licensing terms.