Project Print Lab
Project Print Lab

Mario Magnetic Spinning Question Mark Fidget Block

by
ProjectPrintLab
ProjectPrintLab
ProjectPrintLab
ProjectPrintLab
|
Image 1 of 3
Mario Magnetic Spinning Question Mark Fidget Block  3d model
ProjectPrintLab
ProjectPrintLab
|
Image 1 of 3
Mario Magnetic Spinning Question Mark Fidget Block  3d model
2D
3D
Makes
Mario Magnetic Spinning Question Mark Fidget Block  3d model
Mario Magnetic Spinning Question Mark Fidget Block  3d model
Mario Magnetic Spinning Question Mark Fidget Block  3d model

Mario Magnetic Spinning Question Mark Fidget Block

This magnetic Mario Question Mark Block is the ultimate desktop fidget spinner. The base block and spinning panel is the core to a lot of different spinning designs. The Mario ? Block is the first in the series and released exclusively on MAR 10 (MARIO).

The print file includes the following"

  1. (4) ? Box Panels
  2. (1) Plain Top Panel
  3. (1) Bottom Spinner Panel
  4. (4) Question Marks (Printed separately for the highest quality)
  5. (1) Inner Base Magnetic Box
  6. (2) Magnet Alignment Jigs
  7. (1) Question Mark Alignment Jig (used as a base to support the question mark panels if the question marks are installed prior to the magnets.

I prefer to print the question marks separately and press them into the panels to achieve the highest quality prints and reduce the amount of filament switching during the print.

No glue is needed to install the magnets, they can be hammered in with the jigs

Not included: (48) 4x2 Neodymium magnets (1) 22mm skateboard bearing (8) 4x2 Neodymium magnets (Used for jigs)


6 Likes12 DownloadsMarch 11, 2024
This model is restricted by licensing terms.