I wanted a dedicated place for my earplugs to sit. They kept getting dirty and misplaced so I created this shelf for them. I'm almost feeling sentimental writing this description like my earplugs have now become my children. 

Attach it to your wall with a command strip or some other type of double-sided tape. 

Print it flat on the face as shown in the picture. No supports, brim, or raft is necessary. .12-.16 layer height is recommended. 

**This license applies to this file: Creative Commons - Attribution - Noncommercial - Share Alike**

The Earplug Shelf - A Place For Your Plugs To Chill

The Earplug Shelf.stl

Holds an ice scoop on the side of your ice maker. This model is a remix/edit of this creator: https://www.thingiverse.com/thing:5196224. I removed the original support bracket, added a chamfer to the bottom of the holder, and rounded over the top edge of the holder.

When I printed it, it was slightly too large but it still worked fine. Depending on the size of your ice scoop, you may find it helpful to scale the model down by 5-10%

I remixed this to work with an igloo ice machine scoop. As long as your scoop is similar or the same size, it will work.

You can affix the holder onto your ice machine with some double-sided sticky tape.

Variable layer height is recommended toward the top of the holder, so the curved edges come out nicely. You could also just print the whole thing at .16 or lower so the layer lines are less noticeable. It is recommended you use PLA or PETG for the model, but other materials would work fine. 15-25% infill will work fine. 

**This license applies to this file: Creative Commons - Attribution (Same license as the original designers model)**

Ice Scoop Holder For Countertop Ice Machine/Maker

Ice Scoop Holder.stl

This is a remix of the top lid riser for the X Plus 3 (Found here: https://www.printables.com/model/624829)

I removed the overhangs from the riser, widened the lid pocket, and added chamfers and fillets for aesthetic purposes. 

**This license applies to this file: Creative Commons - Attribution - Share Alike (Same license as the original designers model)**

Qidi X Plus 3 Top Lid Riser Remix Foldable

Qidi X Plus 3 Lid Riser.stl

I wanted to mount my glass cleaner to the side of my printer workbench, so I created this little holder to do that :) 

It attaches to your desired surface with 4 1" drywall screws (definitely overkill) Works great though! And looks pretty good.

I printed this part in PETG with 25% infill. I printed at a .12 layer height so the curves came out nice. No supports needed

**This license applies to this file: Creative Commons - Attribution - Noncommercial - Share Alike**

Glass Cleaner Spray Bottle Holder/Mount/Hook

Glass Cleaner Spray Bottle Holder.stl

A simple funnel designed specifically for refilling dry & dry silica gel containers. The mouth of the funnel is 77m, the spout is 24mm, and the funnel is 85mm tall.

**This license applies to this file: Creative Commons - Attribution - Noncommercial - Share Alike**

Silica Gel Funnel (24mm Spout 77mm Mouth)

Silica Gel Funnel.stl

Easily mount your solid state drive or hard drive disk in your hard drive bay. 

These spacers work with any 2.5 or 3.5" hard drive. For use with M3x6mm Cap head screws. 

The spacers will work great if you print them with a .2mm layer height. 

**This license applies to this file: Creative Commons - Attribution - Noncommercial - Share Alike**


Hard Drive Mounting Spacer - M3x6mm - Washers For 2.5" & 3.5" SSD or HDD

Hard Drive Spacer.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Practical3DPrints

Achievements

Seedling