I received the XGIMI MoGo 2 as a graduation gift and absolutely love it. The only problem? When I set it on my bedpost, it would shake every time I moved. I had two options: spend $79.99 on the official angle mount… or design my own. So, let’s make a mount!

I sketched up a design and refined it into the model files you’ll find here.

What you’ll need Print parts

• 1× BASE_PROJ_SCREW.stl

• 1× MOUNT_HOLD.stl

• 1× PROJ_HOLD.stl

• 1× SUPPORT_BEAM_L.stl

• 1× SUPPORT_BEAM_R.stl

Hardware

• 4× M4 × 10 mm heat inserts

• 4× M4 × 20 mm hex screws

• 2× M5 × 10 mm heat inserts

• 2× M5 × 20 mm hex screws

• 2× #6 × 1 ½" metal screws

• 2× nylon wallboard anchors (optional, I drilled directly into wood)

Print settings I printed this in PETG at 15% infill. I chose not to increase the infill because the support beams provide plenty of strength.

Assembly notes On PROJ_HOLD: use a soldering iron (or heat insert tool) to place the inserts into the marked locations in the attached images.

On MOUNT_HOLD: repeat the same process for its insert locations.

The final build should look like the images below.

I also included a 3D printed screw that fits standard mounting holes. Just be careful not to overtighten, it’s plastic and could snap inside.

Want to see it in action? Check out the reel I made to show how mine turned out!

If you enjoyed this project, you can find more of my designs, videos, and ways to support my work here: 👉 https://linktr.ee/pandapandap

I’ve also included the FreeCAD files in case anyone wants to remix or adapt the design.

Thanks for checking out my project and happy printing!