%2520Print.jpg&w=3840&q=75)
%2520Printed.jpg&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
.png&w=3840&q=75)
Keychain of the brand logo.
This model has about 7cm (2.75inches) in its larger side but is totally resizable.
When you purchase this model you get: ▪ (embossed) .3mf - model with depth and color suggestion that can be changed ▪ .3mf - multicolor model with no depth ▪ (embossed). stl - model with depth, no multicolor. ▪ .stl - in this version it will appear with no details, no color, and may be only an exterior shape. for multicolor open the .3mf and for one color print open the .stl (embossed) version.
I'm open to suggestions and ideas if you want to see specific content.
Enjoy!
Happy Printing and thank you for your support!
Note: The .3mf has the settings/profile for a P1S, check if it's needed to be change to suit your printer.
If you want a commercial license for your printed models you can support me on: Patreon: patreon.com/Palm3D Buy me a Coffee: buymeacoffee.com/palm3d Thangs: thangs.com/designer/PALM3D