COMMERCIAL LICENSE PERSONAL PLAN - UNLOCK ALL DESIGNS

I am happy to share the lamp I hinted at yesterday with a new little twist!

This lamp has two different bases, specially designed to fit either a standard lamp socket or a LED puck light! For the puck light I am using the Bambu Labs Lamp Kit LED!

The Tripod is designed to fit the E14 and E26/27 sockets. (Due to request from members for a socket size of 40mm this size is also included)

_PRINT SETTINGS _

BASE: Note - I used a 0.6mm nozzle for the Wood filament to get the best results, however, you can do this base with a standard 0.4mm nozzle as well.

TRIPOD STYLE

0.6mm Nozzle Layer Height: 0.3mm Walls: 3 Infill: 10%

Ironing Settings: Ironing: Top Surfaces Pattern: Rectilinear Speed: 150mm/s Flow: 38% Line Spacing 0.3mm

0.4mm Nozzle Layer Height: 0.2mm Walls: 3 Infill: 10%

Ironing Settings: Ironing: Top Surfaces Pattern: Rectilinear Speed: 150mm/s Flow: 38% Line Spacing: 0.2mm

LED PUCK STYLE:

Layer Height: 0.2mm Walls: 3 Infill: 20% Lightning

SHADE: This was printed with a 0.4mm Nozzle, feel free to try a 0.6mm if you would like!

I have used a modifier to cut out the proper hole size for the suited base - please ensure you print the proper shade for the tripod base or the led puck base!

Vase Mode: ON Smooth Vase: ON Layer Height: 0.2mm Line Width: 0.6mm - All settings Bottom Layers: 5

Material List (Includes Affiliates)

Lamp Cords: https://amzn.to/4mXcBSi Lamp Sockets: https://amzn.to/3HOcucU Lamp LED Puck Light: Bambu Link Amazon Equivalent Bambu Wood PLA Bambu Matte Caramel PLA

As always, if there is any issues, suggestions or any help needed, please reach out! I am happy to help :)