NoStep
NoStep360 followers
Follow
NoStep
NoStep
|
Image 1 of 4
Hextraction Airlock Spinner 3d model
NoStep
NoStep
|
Image 1 of 4
Hextraction Airlock Spinner 3d model
Hextraction Airlock Spinner 3d model
Hextraction Airlock Spinner 3d model
Hextraction Airlock Spinner 3d model
Hextraction Airlock Spinner 3d model

Hextraction Airlock Spinner

A mechanical version of the Airlock Tile by IceChes. It's a manual triple dispense tile which uses a screw to keep the spinner falling out and is even compatible with the Mechanical Link!

Rules Card Text Setup: Chamber must be oriented as shown. Trigger: If 3 balls are in this, spin chamber 1 full rotation.

Printing / Assembly Instructions

  • Standard | Install the Chamber with any M3 screw. Keep it tight enough where a ball won't move it, but a player can spin it.

  • Linkable | Install the Chamber_Linkable with any M3 screw with a washer inbetween the tile and chamber. Keep it loose, it should freely spin when the tile is shaken.

Community Makes (1)
Tiles with moving parts are particularly fun to print and get to work! Once I got the tightness of the screw dialed in just right, it spins wonderfully! Thanks for the share!
Tiles with moving parts are particularly fun to print and get to work! Once I got the tightness of the screw dialed in just right, it spins wonderfully! Thanks for the share!


Community Makes (1)
Tiles with moving parts are particularly fun to print and get to work! Once I got the tightness of the screw dialed in just right, it spins wonderfully! Thanks for the share!
Tiles with moving parts are particularly fun to print and get to work! Once I got the tightness of the screw dialed in just right, it spins wonderfully! Thanks for the share!

Discussions
A
awazawazawaz
Tiles with moving parts are particularly fun to print and get to work! Once I got the tightness of the screw dialed in just right, it spins wonderfully! Thanks for the share!
Tiles with moving parts are particularly fun to print and get to work! Once I got the tightness of the screw dialed in just right, it spins wonderfully! Thanks for the share! 3d model
PrinterBambu Lab A1 mini
Print bed sizeX: 180 mm; Y: 180 mm; Z: 180 mm
MaterialPLA
Layer height0.2 mm
Infill density15 %

Hextraction Airlock Spinner

92 downloads · 2 years ago in  and 
NoStep
NoStep360 followers
Follow