AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects

3mf and stl included

Filaments Used: PLA PolyTerra Black PLA PolyLite Pink PLA PolyLite PLA BambuLab Basic Jade White 3D printing settings

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Pink At layer #10 (0.88mm) swap to Magenta At layer #13 (1.12mm) swap to Jade White for the rest.