This is a fan art representation and a 3d printable kit inspired by the Mandalorian Armorer,

Whats included:
- chest armor in various presliced options

Join our community and find out more at:
https://www.facebook.com/groups/3282336185171090

or follow me on instagram:
https://www.instagram.com/mysterymakers_3d/

If you like this model please consider joining my patreon. Lots of models each month and many rewards

https://www.patreon.com/mysterymakers

Armorer chest piece

mysterymakers.stl

This is a 3d printable custom model inspired by the Darksaber prop. 

What do you get ? Please check the photos as well:

- it has both clean and textured shell (3d printable textured grip) 
- made to fit electronics/led's inside
- it has a 3d printable stand that can be printed without supports
- made to fit M3 screws/bolts so you can access electronics/led's in the upper body shell
- removable lower body shell - so you can access electronics or add something for stability (we'll most likely use those more once the blade is ready)
- it is made to be both FDM and resin compatible, and not only compatible but you are welcome to print FDM inner parts for stability, and shell in resin for a nicer look.

The files are made with extra care and 3d printability in mind, so its a fairly simple print and assembly. Check out the photos to see what's included.

Join our community and find out more at:
https://www.facebook.com/groups/3282336185171090

or follow me on instagram:
https://www.instagram.com/mysterymakers_3d/

If you like this model please consider joining my patreon. Lots of models each month and many rewards

https://www.patreon.com/mysterymakers

Darksaber with stand

This is a fan art representation and a 3d printable lightsaber kit inspired by the the Armorer's hammer.

It is made to be 3d printed both in resin and FDM (filament)

ABOUT THE PROJECT
- it is made to be printed as simple as possible without any supports., just follow the assembly guide.
- there is also an option with a hollow handle for a 10 mm rod/pipe insert to make it even more sturdy

Join our community and find out more at:
https://www.facebook.com/groups/3282336185171090

or follow me on instagram:
https://www.instagram.com/mysterymakers_3d/

If you like this model please consider joining my patreon. Lots of models each month and many rewards

https://www.patreon.com/mysterymakers

The Armorer's hammer

This is a fan art representation and a 3d printable kit inspired by the Fremen Thumper.

It is made to be 3d printed both in resin and FDM (filament).

The files are made with extra care and 3d printability in mind, so its a fairly simple print and assembly. Check out the photos to see what's included.

About the project;

its an easy build using 8x8 assembly pins and 5x10mm magnets if you wish to have the spike removable at the bottom. The build has a lock in place system designed in so you can hold it open or closed as a display piece. There is an alternate piece included thats a tighter fit if you wish to leave the Thumper open.

All files have offsets so it's easier to assemble.

Join our community and find out more at:
https://www.facebook.com/groups/3282336185171090

or follow me on instagram:
https://www.instagram.com/mysterymakers_3d/

If you like this model please consider joining my patreon. Lots of models each month and many rewards

https://www.patreon.com/mysterymakers

Fremen Thumper

This is a fan art representation and a 3d printable kit inspired by Mandalore The Ultimate concept arts. It is my own take on the mask as a physical one does not exist so i figured i’d try to bring one to like.

Please check photos of whats incluced, it is a wearable 1:1 scale prop stl files for 3d printing.

It is made to be 3d printed both in resin and FDM (filament)

Join our community and find out more at:
https://www.facebook.com/groups/3282336185171090

or follow me on instagram:
https://www.instagram.com/mysterymakers_3d/

If you like this model please consider joining my patreon. Lots of models each month and many rewards

https://www.patreon.com/mysterymakers

Mandalore the Ultimate

The files are made with extra care and 3d printability in mind, so it's a fairly simple print. 

It's a single piece print that can fit on the bambulab x1c print bed. It is made to fit my head at a circumference of 585 mm :) 

I can’t wait to see your skills using those chrome paint and shiny surfaces :D

Join our community and find out more at:
https://www.facebook.com/groups/3282336185171090

or follow me on instagram:
https://www.instagram.com/mysterymakers_3d/

If you like this model please consider joining my patreon. Lots of models each month and many rewards;

https://www.patreon.com/mysterymakers


[FREE] 3 body problem VR helmet

I'm Marko, and I'm thrilled to introduce you to this page. As a lifelong enthusiast of sci-fi, movies, comics, and crafting, I've embraced the world of 3D printing. Now, we can bring our favourite props and creations to life. With years of experience in 3D modeling, including CAD, sub-div, and digital sculpting, I'm dedicated to producing high-quality cosplay pieces and custom projects that are both detailed and printer-friendly.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

MysteryMakers