tracking pixel
Eric G

Clamp-On Vise - Fully 3D Printable

by
MuskokaResearch
Follow
Follow
Remix Model
MuskokaResearch
MuskokaResearch
Image 1 of 11
Clamp-On Vise - Fully 3D Printable 3d model
2D
3D
Makes
Clamp-On Vise - Fully 3D Printable 3d model
Clamp-On Vise - Fully 3D Printable 3d model
Clamp-On Vise - Fully 3D Printable 3d model
Clamp-On Vise - Fully 3D Printable 3d model
Clamp-On Vise - Fully 3D Printable 3d model
Clamp-On Vise - Fully 3D Printable 3d model
Clamp-On Vise - Fully 3D Printable 3d model
Clamp-On Vise - Fully 3D Printable 3d model
Clamp-On Vise - Fully 3D Printable 3d model
Clamp-On Vise - Fully 3D Printable 3d model
Clamp-On Vise - Fully 3D Printable 3d model
This model is restricted by licensing terms. 
50 Likes105 DownloadsMarch 4, 2024
This model is restricted by licensing terms. 


This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLE

Additional Parts: 3x Retaining Clip.stl 2x Guide Rod A.stl 2x Grip.stl

Assembly (See Pictures):

Adhere Frame Base Pad TPU to Frame. Install Grip TPU to Frame and Vise via dovetail slots. Partially thread in Mounting Bolt. Thread Mount Plate TPU onto Mounting Bolt. Mount the vise to a benchtop to complete the following steps. Feed both guide rods through the Frame and Vise. Attach one Retaining Clip to the grooved sections at the base of each guide rod. Install Threaded Rod all the way through the Frame and Vise. Attach the final Retaining Clip to the end of the Threaded Rod.


50 Likes105 DownloadsMarch 4, 2024




This model is restricted by licensing terms. 
50 Likes105 DownloadsMarch 4, 2024
This model is restricted by licensing terms.