.png&w=3840&q=85)
.png&w=256&q=75)
.png&w=256&q=75)
Small Thread - Fix Point (Supported)
Fix Points allow for fast and easy installation and removal of any accessory part while still being sturdy.
This is a “Small Thread” Fix Point that can screw into the small threads on the Multiboard Tiles.
Attach parts that have a negative Fix Point or Rail, like "Rail - Multibin Shells" or other accessories.
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
Small Thread - Fix Point (Supported)
Fix Point to Countersink Adapter
Flush - Small Hole Center Marking Tool
6.25 Offset - Small Hole Center Marking Tool
12.5 Offset - Small Hole Center Marking Tool
2x6 MU - Right Support End - Modular Bolt-Locked Shelf
4x8 MU - Center - Modular Bolt-Locked Shelf
2x2 MU - Right Support End - Modular Bolt-Locked Shelf
2x6 MU - Left Support End - Modular Bolt-Locked Shelf
8x8 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Right Support End - Modular Bolt-Locked Shelf
4x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Left Support End - Modular Bolt-Locked Shelf
2x2 MU - Left Support End - Modular Bolt-Locked Shelf
8x2 MU - Center - Modular Bolt-Locked Shelf
8x4 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Right Support End - Modular Bolt-Locked Shelf
8x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Center Support - Modular Bolt-Locked Shelf
Tried these in PETG, 0.2mm layer height, 15%infill (which doesnt do much on these tiny models) but the break-away part still fused to the nut. The "folded" variant works way better.
if you turn ironing on for all top surfaces that will make it easier to separate the supports from the screws. Its still requires some force to separate but they will come off cleanly without damaging the part, its the same technique as stacking plates.
I was using the split screws before i discovered this as well but i find the supported ones are much easier to install as they have flat sides and less material contacting the hole this helps compensate for variations in tolerances.