Multitool

14K downloads · 2 years ago · The Multitool is an all-in-one tool that allows you to screw in different types of threads. You can

This model is restricted by licensing terms.

View license.

Description

The Multitool is an all-in-one tool that allows you to screw in different types of threads. You can use it to…

Screw “screw-in fasteners” into snaps.
Screw “Multigrid T bolts” into the bottom of Multigrid Bins.
Screw “Multigrid T bolts” into the side of Vertical Multigrid Bins, by connecting the Multitool pieces at a 90-degree angle.
Tighten flat-head bolts by using the small Multool piece (only works with medium and big thread bolts).
Tighten any “Flat Push-Fit Head, Bolt” by inserting the Multitool into the push-fit hole.

The two Multitool pieces click together for nice storage.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

—

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io

Tags:

Community Makes (3)

The slots in the tools are to use them as drivers for each other. The hooks/teeth fit small thread T bolts. The smaller tool's non-hook end fits inside push-fit bolts and mid-thread thread-in snaps; with the large tool attached you can use this to tighten these kinds of parts.

This is the photo for my comment about the uses of these. They fit the small and mid sized hex headed screws. I don't know (yet) what the holes and teeth are for.

Starting with Multiboard, so I guess I need this.

Printed in Prusament PETG Prusa Orange on my Prusa XL5

Community Makes (3)

Discussions

sean.enig10 months ago

The slots in the tools are to use them as drivers for each other. The hooks/teeth fit small thread T bolts. The smaller tool's non-hook end fits inside push-fit bolts and mid-thread thread-in snaps; with the large tool attached you can use this to tighten these kinds of parts.

PrinterBambu Lab P1P

MaterialPLA

Layer height0.2 mm

Infill density15 %

SupportsNone

nitrosont2 years ago

Do i assemble this somehow? I don't really know how to use it / what to use it for?

msemko1 year ago

I really wish someone would answer this. It's so ridiculous when the question sits unanswered for 7 months

wullxz11 months ago

They're probably to tighten/loosen different sizes of bolts. I'll post a picture as comment after this one. The Mid and small screw with hex shaped head fit into one of these and can then be turned more easily. I don't see how they could be used together. I think they're just different sizes, that's all. I don't know (yet) what the holes or the teeth at the end are for.

cullenjwebb8 months ago

You can see in the photos how either wrench can slot into the other for more leverage, but it's not always needed and not permanent "assembly".

ulaB2 years ago

Starting with Multiboard, so I guess I need this. Printed in Prusament PETG Prusa Orange on my Prusa XL5

wullxz11 months ago

This is the photo for my comment about the uses of these. They fit the small and mid sized hex headed screws. I don't know (yet) what the holes and teeth are for.

PrinterBambu Lab X1

MaterialPLA

Layer height0.3 mm

Infill density15 %

SupportsNone

lucymariee91 year ago

The Multitool sounds like an incredibly versatile addition to any workspace, making organization and assembly much easier. Pair it with custom oversized T-shirts for a comfortable and stylish work setup! Check them out here: https://www.customlin.com/product/190g-custom-oversized-t-shirt/