I have designed this mask a quite a while ago for a small LARP-event. 

It is loosely based on the “Mask of the Master” from the German tabletop role-playing game “The Dark Eye” (German: “Das Schwarze Auge”).

It was printed in PLA, sanded and painted with Black 3.0 from Culturehustle.

Feel free to contact me via Instagramm (https://www.instagram.com/mr.simonpaints/) if you have any questions ;)

Mask of the Master inspired Mask (The dark Eye) – (German: Maske des Meisters)

I have designed this cultist mask for a friend, who plays a cultist in a LARP-adventure. Thou it was specifically designed to fit her, it easily fits other people ;)

The symbol featured on this mask is of “the nameless God“ (German: Der Namenloser) from the German tabletop role-playing game The Dark Eye (German: Das Schwarze Auge)


I printed it in white ABS, sanded it and airbrushed it using “Alclad II Polished Brass”


Feel free to contact me via Instagramm (https://www.instagram.com/mr.simonpaints/) if you have any questions ;)

Cultist Mask Nameless One - (German: DSA Kultistenmaske des Namenlosen)

I have designed this cultist mask for my flatmate, as she plays a cultist in a LARP-adventure. Thou it was specifically designed to fit her, it easily fits other people ;)

The symbol featured on this mask is of “the nameless God“ (German: Der Namenloser) from the German tabletop role-playing game The Dark Eye (German: Das Schwarze Auge)


I printed it in white ABS, sanded it and airbrushed it using “Alclad II Polished Brass”


Feel free to contact me via Instagramm (https://www.instagram.com/mr.simonpaints/) if you have any questions ;)

So, I spent almost an entire week to make this printable. It is a fully functional 3d-Puzzle version of the Holding Child from the #CCTMothersDayRemix. 
It can all be printed in one go (“Assembled_Puzzle.stl”), thou you should be familiar on how to use support. The distance between the puzzle pieces is 0,12 mm so your layer Hight should be around that value. I would recommend printing it at a scale of 130 % so you can use a layer Hight of 0,16 mm. For stability of the puzzle-pieces print at a slightly higher temperature than usually and use a wall line count of 3 or 4. Quite conveniently there is enough space for a LED-tealight inside the model at a scale of >130% ;)
If your print fails at a specific hight or one puzzle-piece breaks you can just print a small part of the model (Part1.stl, Part2.stl and Part3.stl)
“Filled.stl” and “Connected.stl” are much easier to print but only have the look of a 3d-Puzzle and are not functional.


I also have Instagram, where I uplode some 3d-artsy-stuff (mr.simonpaints)

#CCTMothersDayRemix Holding Child 3D-Puzzle

fully functional 3d-Puzzle version of the Holding Child

Assembled_Puzzle.stl

#CCTMothersDayRemix - My remix of the Rocking Chair model. There is space inside the model for a LED-tealight, thou it is quite a tight fit, so printing at a scale of 110% might be advantageous. When placed near a wall this light will project a little hart on the wall. I got the idea because my mom really likes to put tealights almost ever in her household where they all create really nice dancing shadows.
Printing the model is relatively easy if you know how to handle overhangs with supports.

I also have Instagram, where I uplode 3d-artsy-stuff :) 

mr.simonpaints

#CCTMothersDayRemix Rocking Chair with space for an LED-light

#CCTMothersDayRemix - My remix of the Rocking Chair model. There is space inside the model for a LED-tealight, thou it is quite a tight fit so printing at a scale of 110% might be advantageous. When placed near a wall this light will project a little hart on the wall (I will upload an image on my Instagram: www.instagram.com/mr.simonpaints/). I got the idea because my mom really likes to put tealights almost ever in her household where they all create really nice dancing shadows.
Printing the model is relatively easy if you know how to handle overhangs with supports.

#CCTMothersDayRemix_Rocking Chair.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

MrSimonPaints

Achievements

Seedling

Mask of the Master inspired Mask (The dark Eye) – (German: Maske des Meisters)

Cultist Mask Nameless One - (German: DSA Kultistenmaske des Namenlosen)

#CCTMothersDayRemix Holding Child 3D-Puzzle

#CCTMothersDayRemix Rocking Chair with space for an LED-light