Qidi X-Pro LCD Rear Cover

This is a rear cover to protect the exposed circuit board on the back of the LCD touch screen. The model is printable on the X-pro without supports or additional brim, etc.

The photos show one printed in white for illustrative purposes, but you can print any color since the part is only visible if you're looking from inside the printer.

The face is 1mm thick and the rim is 2mm thick, and is designed to sit on the molded bosses (not the board) and attach using self-tapping screws into the screw towers in the bezel.

I printed this with at 0.2mm layer height, 3 walls, 3 solid top/bottom layers and infill doesn't matter since these settings don't leave space for infill between solid walls/layers.