A model of the Eel Ship Selljammer from second edition Dungeons and Dragons. This model was designed for a commission for use in a second edition Spelljammer game but it could easily be ported into fifth edition if desired. The original rules and floor plan for the Eel Ship can be found in “Spelljammer Lost Ships” which can be purchased at DrivethruRPG.

Files are included for two different scales. The thumbnail features the 1:600 scale version. This is the same scale as the official Spelljammer ship models sold by Wizkids. There's also a 1:900 scale version designed to match the approximate scale of the paper cutout ship miniatures that were sold with second edition spelljammer books. Pre-supported versions of both sizes are included. The same 1 inch diameter base is used for both versions.

Commission me to design custom miniatures and buy 3d prints of my designs at Etsy:
https://www.etsy.com/shop/MechatronicGames

STL files for all my designs are available at my Cults3d page here:
https://cults3d.com/en/users/Mechatronist

Follow me on Cults3d to stay notified about all of my designs as they are released.

Here's a link to a time-laps video of me designing this model in Blender:

https://youtu.be/w8TNDm0Y6qM

This Eel Ship Model is unofficial Fan Content permitted under the Fan Content Policy. Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.


Eel Ship Spelljammer Miniature from dnd 2e

Eel Ship Large.stl

A 3D version of the #OpenDnD symbol made by Reddit user ssddgrl. Here’s the post with the original version:
https://www.reddit.com/r/DnD/comments/10eko6e/oc_art_i_made_this_if_anyone_wanted_to_use_it_for/

This symbol was designed to spread awareness of the controversy surrounding Wizards of the Coast and Hasbro’s plans to revoke the current open gaming license and replace it with a more restrictive one. If you want to know more there is no shortage of articles and social media discourse on the subject but here’s a brief explanation.

The D&D Game system has been free to use for third parties to make their own content under the Open Gaming License (OGL) with few restrictions. This has helped enable a culture of sharing creativity in the community and has vastly expanded the amount of professionally produced D&D content available by allowing people to market third party content. It was recently leaked that Wizards of the Coast planned to revoke the OGL and replace it with one that was more restrictive and gave them more control over content produced using it. Community backlash and boycotts have caused them to delay the implantation of this new OGL. They have also released statements indicating that they intend to walk back some of the changes people objected to. However, at this point they still plan to replace the OGL with a new version that will presumably be more restrictive than the current one.

Update:
Wizards of the Coast has abandoned their plan to revoke and replace the OGL and have made the version of the rules that are available under the OGL also available under a creative commons license. Thank you to everyone who supported the open dnd movement.

To print this you will need to use a nozzle no larger than 0.4mm to get the letters to come out right. I printed at a layer height of 0.1mm. I used a single nozzle to print this and swapped filaments mid print to make it multi-colored.


#OpenDnD Pin

OpenDnD Pin Front.stl

A model of the Vipership Selljammer from second edition Dungeons and Dragons. This model was designed for a commission for use in a second edition Spelljammer game but it could easily be ported into fifth edition if desired. The original rules and floor plan for the Vipership can be found in “Spelljammer Lost Ships” which can be purchased at DrivethruRPG.

Files are included for two different scales. The thumbnail features the 1:600 scale version. This is the same scale as the official Spelljammer ship models sold by Wizkids. There's also a 1:900 scale version designed to match the approximate scale of the paper cutout ship miniatures that were sold with second edition spelljammer books. Pre-supported versions of both sizes are included. The same 1 inch diameter base is used for both versions.

This Vipership model is unofficial Fan Content permitted under the Fan Content Policy. Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.

All my designs are available at my Cults3d page here:
https://cults3d.com/en/users/Mechatronist/creations

Some of my paid designs are also available at Etsy here:
https://www.etsy.com/shop/MechatronicGames

Follow me on Cults3d to stay notified about all of my designs as they are released.

I will also start selling physical models soon. Follow my Etsy shop if you are interested in that.

Here’s a link to a video time-lapse of me designing this model in Blender:
https://youtu.be/A9wTHvK40mg


Vipership Spelljammer Ship Miniature from dnd 2e

vipership Large.stl

A model of the Triop Selljammer from second edition Dungeons and Dragons. This model was designed for a commission for use in a second edition Spelljammer game but it could easily be ported into fifth edition if desired. The original rules and floor plan for the Triop can be found in the Spelljammer War Captain's Companion Box Set which can be purchased at DrivethruRPG.

Files are included for two different scales. The thumbnail features the 1:600 scale version with a 2 inch base. This is the same scale as the official Spelljammer ship models sold by Wizkids. There's also a 1:900 scale version designed to match the approximate scale of the paper cutout ship miniatures that were sold with second edition spelljammer books. Pre-supported versions of both sizes are included. There is also a 1 inch and 2 inch diameter base. Both sizes of ship can fit on either base.

This Triop model is unofficial Fan Content permitted under the Fan Content Policy. Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.

All my designs are available at my Cults3d page here:
https://cults3d.com/en/users/Mechatronist/creations

Some of my paid designs are also available at Etsy here:
https://www.etsy.com/shop/MechatronicGames

Follow me on Cults3d to stay notified about all of my designs as they are released.

I will also start selling physical models soon. Follow my Etsy shop if you are interested in that.

Here’s a link to a video time-lapse of me designing this model in Blender:
https://youtu.be/kG3Z2D1iapM


Triop Spelljammer Ship Miniature from dnd 2e

Triop Ship Large.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5404745.

This is a model of a taxxon from Animorphs. It is designed to be printed on a resin printer and is not suitable for FDM printing. It is on a 1 inch by 2 inch base and is at approximately a 28mm-32mm scale.

Find My other Models Here:
https://cults3d.com/en/users/Mechatronist/creations

Animorphs Taxxon Miniatrue

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5462724.

A miniature of a whale like alien animal. I recently got my first art tablet and designed this model as sculpting practice with it. This can be used in a tabletop game as either an aquatic or space creature. It would be well suited to a Dungeons and Dragons Spelljammer game or another sci fi game.

This model is about 3.5 inches (89mm) long and 2.5 inches (63mm) wide. The base is 3 inches (76mm) in diameter.

I printed this model with tree supports and the nose pointed down at a 45 degree angle.

More of my work can be found at my Cults3D Page here:
https://cults3d.com/en/users/Mechatronist/creations

Alien Space Whale Miniature

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5469075.

A miniature of a flying galleon ship with extra sails sticking out the sides. This model can be used as a space galleon in a Dungeons and Dragons Spelljammer game or in other tabletop fantasy games.

This model is at a scale of 1:600. This is the same scale as the official Spelljammer ship miniatures made by Wizkids. It’s about 4 inches (100mm) long and 3.75 inches (95mm) Wide. Both These measurements were taken from the tips of the masts. The base is 3 inches (76mm) in diameter.

The model is designed to be printable on a FDM printer with minimal supports. When printing don’t use a nozzle any larger than 0.4mm. I recommend a layer height of 0.1mm. Set the support overhang angle to 60 degrees in order to avoid the generation of unnecessary supports. I’ve found that in Cura the default zig zag support pattern does not properly generate supports for some of the thinner areas on the model. The grid support pattern worked well for me. If you plan to paint this model I suggest printing it in black filament because there are some spots that are difficult to reach with a paintbrush and unpainted crevices will stand out less if they're black.

A version of this model without the side sails can be found for free here:
https://cults3d.com/en/3d-model/game/galleon-ship-model-compatible-with-dnd-spelljammer

Find more of my work including more airship models at my Cults3D page here:
https://cults3d.com/en/users/Mechatronist/creations

I’m working on more airship miniatures. The best way to stay notified on future releases is to fallow me on Cults3D (linked above) or on Instagram here:
https://www.instagram.com/mechatronist1432/?hl=en

Galleon Flying Fantasy Ship Model Compatible With DnD Spelljammer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5378385.

A model of a giant tesla coil designed to transmit wireless signals and energy or electrocute anything that happens to be near it. This model can be used as terrain for a tabletop miniatures game or as an element of a miniature display. It is printable on a FDM printer without supports. The base of the tower has a 2 inch diameter and it is just under 4 inches tall.

Find More of my Steampunk Models Here:
https://cults3d.com/en/users/Mechatronist/creations

Steampunk Tesla Coil Tower Miniature

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5473514.

A miniature of a flying galleon ship. This model can be used as a space galleon in a Dungeons and Dragons Spelljammer game or in other tabletop fantasy games.

This model is at a scale of 1:600. This is the same scale as the official Spelljammer ship miniatures made by Wizkids. It’s about 4 inches (100mm) long, as measured from the tips of the masts, and 1 inch (25mm) Wide. The base is 3 inches (76mm) in diameter.

The model is designed to be printable on a FDM printer with minimal supports. When printing don’t use a nozzle any larger than 0.4mm. I recommend a layer height of 0.1mm. Set the support overhang angle to 60 degrees in order to avoid the generation of unnecessary supports. I’ve found that in Cura the default zig zag support pattern does not properly generate supports for some of the thinner areas on the model. The grid support pattern worked well for me. If you plan to paint this model I suggest printing it in black filament because there are some spots that are difficult to reach with a paintbrush and unpainted crevices will stand out less if they're black.

A version of this model with extra sails sticking out the sides can be found for free here:
https://cults3d.com/en/3d-model/game/galleon-flying-fantasy-ship-model-compatible-with-dnd-spelljammer

Find more of my work including more airship models at my Cults3D page here:
https://cults3d.com/en/users/Mechatronist/creations

I’m working on more airship miniatures. The best way to stay notified on future releases is to fallow me on Cults3D (linked above) or on Instagram here:
https://www.instagram.com/mechatronist1432/?hl=en 


Galleon Ship Model Compatible With DnD Spelljammer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5409571.

A Star Trek the Next Generation style starfleet combadge with a bisexual pride flag in the oval portion. It has almost exactly the same dimensions as the actual combadge props used on the show. This is not set up for multi color printing. The intent is for you to paint in the indented areas with the colors of the flag. There are 2 versions: one with a flat back and the other with a slot for you to glue in a pin back.

I’m posting this during my first pride month out so I just wanted to wish all of you a happy pride.

Find my other work here:
https://cults3d.com/en/users/Mechatronist/creations

Bisexual Pride Star Trek Combadge Pin

I learned the basics of CAD software and 3D printing in college while earning a dual major in mechanical engineering and physics. During lockdown I learned how to make 3D art using Blender and started modeling and printing tabletop miniatures for RPGs. Most of my work so far has been clockwork robots and Spelljammer inspired flying ships.

Digital STL files of all of my work is available at my Cults3d page here:
https://cults3d.com/en/users/Mechatronist

Physical resin prints of my designs are available at my Etsy store here:
https://www.etsy.com/shop/MechatronicGames


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships