Print-in-place articulated Tiny Penguin and Snowman! Keychain versions included! Considerations:
- They are small and articulated. That means good bed adhesion is required. For tricky filaments that usually have worse adhesion I recommend using some kind of glue (my personal favourite is 3DLac spray).
- The "Standard" version is the original one. If you find adhesion issues with the head getting loose mid-print, then try the stabilized "_STB" alternative. Those have tiny built-in supports on the neck that help keeping everything together, and can be released by rotating the head after print.
- I've included all 4 versions of each design on the same 3MF file, which makes it tidier. Just delete/deactivate the ones you don't want to print 😉
- The Tiny Penguin has a small built-in brim for the wings. Easy to remove after printing. It has a couple of support dots in the armpits as well to help stabilize the wings during printing. It may feel a bit hard to open the wings on the first try, but should be loose after that.
- For the Tiny Snowman, I recommend printing them with 3 perimeters, or a solid threshold that makes the arms solid. Especially if you plan to use it as a keychain.
- To change colors easily, check my quick tutorial.
Categories:
3 Likes6 DownloadsDecember 5, 2024