I'm very excited to share my articulated Rattlesnake. This snake features an Opening Mouth and a working Rattle with print-in-place beads! The base length is 25 inches, BUT that's just the starting point! With the snap-fit body joint system and the additional Body Extension Links, you can make it as long as you want! Each Extend Link adds another inch to the total length. Try different colors to add a striped effect.
Updated... Multicolor 3mf file now included for eye, mouth, and rattle coloring. This model is Pre-Supported (no added supports required).
Here is a quick video showing how to remove the Pre-Support, snap-fit the head, and assemble the body.
Please, share photos of your makes! I would love to see them!
To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.
Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.
PLEASE READ: All MatMire_Makes Designs are protected under Copyright Law. Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.
To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.
Printing Details *This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.
Includes 11 files: Recommended -Body (Front and Rear): Print-In-Place. Snap-Fit Together -Head Top: Snap-Fit to Head Bottom. Pre-Supported!-Head Bottom: Snap-Fit to the Body Front. Pre-Supported!-Rattle: Separate so it can be printed in a different color. Snap-Fit to Body Rear. If the rattle beads do not print free from the surrounding material, you can use a pointed object, like a pen, to push them into the rattle. Print-in-place. -Body Extend Link: Print-in-place. Add in-between Body Front and Rear.
Extras -Body Aligned (Front and Rear) : Body links are all in a straight line. Gives more options for people with belt or large build volume printers. -Body Rear wRattle & Body Rear wRattle Aligned: Rattle is pre-attached to the body, if you aren't interested in printing it separately.
-3MF: includes multicolor 3MF file (compatible with both PrusaSlicer and Bambu Studio) Though on single extruder printers, I recommend printing the rattle separately too speed up the print time and reduce filament waste.
10% Infill. 3 Walls.
*if you find the Rattle beads are partially fused to the bottom does to elephant's foot artifacts, try pushing them in with a pointed object like a pen.
This model has been successfully printed down to 70%. Below that the joint function may start to become compromised. YMMV