tracking pixel
M

FT Mini Arrow Pod

by
Markus_P
Follow
Follow
Remix Model
M
Markus_P
|
Image 1 of 26
FT Mini Arrow Pod 3d model
M
Markus_P
|
Image 1 of 26
FT Mini Arrow Pod 3d model
2D
3D
Makes
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
FT Mini Arrow Pod 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5791996.

Use this as replacement for the original one. You need 8 Magnets 4mm x 2mm for the battery the battery cover and front cover. And a hot glue gun.

Battery cover is easy to remove to change the battery. There are two front covers. One with a cut out for an AIO FPV cam and another one without.

BOM 8x 4mm x 2mm Magnet (https://bit.ly/3FpPLQv) 1x AIO FPV Camera (https://bit.ly/3UKnAQV)


1 Likes0 DownloadsJanuary 22, 2023


1 Likes0 DownloadsJanuary 22, 2023
This model is restricted by licensing terms.