Two approximately 1957 Oldsmobile rear axles in 1/25 scale, with separate center housings. These axles are plain, so you can add your own spring mounts, shock brackets, etc.

The axle width is 50.7mm flange-to-flange. That's enough to put the tires outboard of the body on a channeled fenderless '32 or '34 Ford. If the tires you intend to use have sidewalls that bulge out, you might want our other Olds axle that is 4mm wider overall. There is a lip on the axle end for mounting '40 Ford backing plates.