Quilted Planter
This is one of my new favorites! The quilted pattern prints really well and looks great in any color. Both the 2.75" and 4.5" are available to print now. I've been improving my workflows so I hope to always release both sizes at the same time from now on.
This planter works with the same mounts as all my other wall planters. I've also included tabletop versions that don't have the wall mount.
Supports None needed!
Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.
Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.
Print Settings .2mm layer height 15% grid infill 2 walls
Filament & Hardware Filament: Bambu Lab Latte Brown & Dark Blue Matte PLA Command Medium Picture Hanging Strips Hardware: #10-12 x 1-1/4 in screws
Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods
Quilted Planter
Heywood Wall Planter v2
Square Tapered Planter
Catchall for The Horizontal Rail
Sunglasses Holder for The Horizontal Rail
Shelf for the Horizontal Rail
The Rail - Coat Hook
The Horizontal Rail
Scales Planter with Hidden Drip Tray
The Rail Tripod V2
Tripod Lamp
The Rail - Tripod Attachment
The Rail - Ira Planter
The Rail - Storage Bins
Wall Planter with Hidden Drip Tray - LG03
The Rail - Hook Attachment
The Rail - Grow Light Attachment
The Rail v2
Hanging Planter - The Gio
Bottle Opener Coasters v2
I just printed my first with the overture PLA as suggested. It looks great, but the threading on the bottom is loose. When it's tightened all the way, you can wiggle the pot and the tray moves. Any suggestion on how to tighten it up?
Hello? @hendricksdesigns any suggestion here?
Hello, I have same problem here, I'm using my Ender V3 KE and it is way too lose...
I don’t know what else I can try. Calibration cube is spit on, steps are near mint, slow down, speed up, add 3-4 walks instead of 2, print walks before Infill…. I mean I literally have an order for 6-7 but I just cannot sell the 8 I’ve made to people with that line. I know the file was updated with the shipping inside, but new old it’s the same line always. That transition where the bottom starts. I know everything I look up is that the infill is pushing out the walls or something.
Just made another update to it that should completely remove the line. Try out the latest version and let me know if it's fixed for you!
The autocorrects are killing more lol Spit on** Walls** Updated with the slopping**
Thought these would post with my comment but they went separate. Comment up 1-2 posts (the line….)
Hello @HendricksDesign great designs, i downloaded them. I do have a question though, and I might be being a bit slow, but I think the dovetail on the pot is the wrong way? With it at the top, I can only slide it onto the wall mount upwards, so it will fall off. Whereas if the dovetail portion on the planter was the other way I could slide it down. Thanks!
Hey! Think you might have the mount upside down!
It gorgeous but the mount has loads of stringing where the command strips go, anyone else have this and know a fix (using wood pla). Also can anyone attest to the durability of the mount in general, there's gonna be a lot of weight on it after some dirt, plant, and water so I'm slightly worried it'll break