I just printed my first with the overture PLA as suggested. It looks great, but the threading on the bottom is loose. When it's tightened all the way, you can wiggle the pot and the tray moves. Any suggestion on how to tighten it up?
I don’t know what else I can try.
Calibration cube is spit on, steps are near mint, slow down, speed up, add 3-4 walks instead of 2, print walks before Infill…. I mean I literally have an order for 6-7 but I just cannot sell the 8 I’ve made to people with that line. I know the file was updated with the shipping inside, but new old it’s the same line always. That transition where the bottom starts. I know everything I look up is that the infill is pushing out the walls or something.
Hello @HendricksDesign
great designs, i downloaded them. I do have a question though, and I might be being a bit slow, but I think the dovetail on the pot is the wrong way? With it at the top, I can only slide it onto the wall mount upwards, so it will fall off. Whereas if the dovetail portion on the planter was the other way I could slide it down. Thanks!
It gorgeous but the mount has loads of stringing where the command strips go, anyone else have this and know a fix (using wood pla). Also can anyone attest to the durability of the mount in general, there's gonna be a lot of weight on it after some dirt, plant, and water so I'm slightly worried it'll break
I tried the small version. I feel like the toleranses are very small. My printers are well tuned, but the mount wouldn't fit onto the planter unfortunately.
am i the only one that doesn't see a way to mount the pot to the mount? im looking through the files and i cant find the "male" end of the dovetail anywhere
Hi, I couldn’t find another way to send you a message. I love how this has printed and used a wood PLA but it is printing a continuous line so there is almost a spiderweb of filament in the middle. Have you seen that before? I am going to try it with a different filament to see if it does the same thing. It doesn’t look like I can upload a picture here. Thank you!
Discussions — Quilted Planter
I just printed my first with the overture PLA as suggested. It looks great, but the threading on the bottom is loose. When it's tightened all the way, you can wiggle the pot and the tray moves. Any suggestion on how to tighten it up?
Hello? @hendricksdesigns any suggestion here?
Hello, I have same problem here, I'm using my Ender V3 KE and it is way too lose...
I don’t know what else I can try. Calibration cube is spit on, steps are near mint, slow down, speed up, add 3-4 walks instead of 2, print walks before Infill…. I mean I literally have an order for 6-7 but I just cannot sell the 8 I’ve made to people with that line. I know the file was updated with the shipping inside, but new old it’s the same line always. That transition where the bottom starts. I know everything I look up is that the infill is pushing out the walls or something.
Just made another update to it that should completely remove the line. Try out the latest version and let me know if it's fixed for you!
The autocorrects are killing more lol Spit on** Walls** Updated with the slopping**
Thought these would post with my comment but they went separate. Comment up 1-2 posts (the line….)
Hello @HendricksDesign great designs, i downloaded them. I do have a question though, and I might be being a bit slow, but I think the dovetail on the pot is the wrong way? With it at the top, I can only slide it onto the wall mount upwards, so it will fall off. Whereas if the dovetail portion on the planter was the other way I could slide it down. Thanks!
Hey! Think you might have the mount upside down!
It gorgeous but the mount has loads of stringing where the command strips go, anyone else have this and know a fix (using wood pla). Also can anyone attest to the durability of the mount in general, there's gonna be a lot of weight on it after some dirt, plant, and water so I'm slightly worried it'll break
Is this water tight? Any issues with leaking?
Do you have a disc wall mount for the 2.75 version?
Could you make a version of this one as a Pen Holder? The small version is the perfect hight. But instead of a drip tray make it one solid object?
When the base is printing, the bottom part prints over nothing which makes it look a bit ugly on the inside.
My wife love it! Thank you very much!
Printed out beautifully!
Hey. How does that round command strip wall mount attached to wall?
Use Command Strip medium picture hanging strips. I'm glad the designer was specific about this because I found a couple dozen varieties on the shelf.
I still dont get it. It wasnt in file folder. So i get them from shelf file?
https://a.co/d/5EjUru4
Oh, wow. Never seen that one before. Tnx
Ok what is the wall mount size i need to make for the 4.5? the one i print is WAY to small to fit the 4.5 pot...
"sliding dovetail wall mount 4.5.stl" or "command strip wall mount 4.5.stl"
I would love to have this in a freestanding version.
Like the description says, there is a tabletop version included that doesn't have a wall mount.
I tried the small version. I feel like the toleranses are very small. My printers are well tuned, but the mount wouldn't fit onto the planter unfortunately.
am i the only one that doesn't see a way to mount the pot to the mount? im looking through the files and i cant find the "male" end of the dovetail anywhere
Make sure you print one of the quilted "wall" pots. The quilted pots are tabletop versions.
Hi, I couldn’t find another way to send you a message. I love how this has printed and used a wood PLA but it is printing a continuous line so there is almost a spiderweb of filament in the middle. Have you seen that before? I am going to try it with a different filament to see if it does the same thing. It doesn’t look like I can upload a picture here. Thank you!
Can you update the step file to not be a mesh? i want to make a small modification to it before i print it
Any chance to get at least 7” version? 4.5 is really small