Works for any kind of brick, screw down holders, top loader or sleeve 

Good for CGC, PSA, Beckett, and Pop report holders

Pokemon Cards, Magic: The Gathering, Marvel, Topps, YuGiOh, etc

This is a great gift or item in order to display your trading Card card collection. This stand can also fit cards inside sleeves and works on all kinds of shelves. 
If there are any questions or clarifications on sizing feel free to message me.

--------------------------------------- Dimensions -------------------------------------------------------------------------------------------
There are several versions of this stand that allow for wider or narrower stands:

Dimensions for entire shelf, Height: 195 mm or 7.63 in,  Depth: 83.2mm or 3.28 in. Width: 3 Different Sizes 

83 mm or 3.3 in (1 wide)
165 mm or 6.5 in (2 wide)
247 mm or 9.724 in (3 wide)

each one of these is 2 tiers high and each shelf is 1 card deep (9 mm or .35 in)

-----------------------------------------------------------------------------------------------------------------------------------

Pokemon / Sports / Trading Card Display Shelf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4894830.

I have several other designs on my account so be sure to check those out too, i also have an etsy  where you can purchase these here: https://www.etsy.com/shop/LlamaCrafting

I will update photos of all the stands once they have been ordered and/or printed.

This is a 3d printed poker playing card stand that fits multiple decks per shelf, there are also versions of this stand:

Each version is read: number of shelves (hight) x how many can fit across each shelf (width) x how many deep it can fit on each shelf (depth)

2x1x3, 2x2x3, 2x3x3: each one of these is 2 shelves high and is 3 cards deep

2x1x4, 2x2x4, 2x3x4: each one of these is 2 shelves high and is 4 cards deep

3x1x2, 3x2x2, 3x3x2: each one of these is 3 shelves high and is 2 cards deep

If you would like a different variation send me a message and I should be able to add it to the list.

This is a great gift or item in order to display your playing card collection. This stand can also fit cards inside sleeves and works on all kinds of shelves. 

If there are any questions feel free to message me.

Also if you would like to see this in different sizes such as 4 shelves with each shelf holding 4, for example, send me a message and I can add that to the listing so you can get it i would just have to quickly edit the file.

Multi-Card Step Poker Card Stand / Playing card Display Active

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4805028.

This is a playing card shelf/display/stand that holds poker-sized playing cards. 

The current files have 4 and 8 tiers that hold 2 cards each. Hence 2x8, 2x4.

You can also print multiple and set them next to each other or glue them to extend the length of the display.

Be sure to post a picture of your cards on the display below!

Playing Card Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4801793.

*The photo only shows 8 decks on the shelf, but the current files hold 12 decks. I haven't had time to print the actual files listed but will update the photos when I do.
The photo is from this file I created: https://www.thingiverse.com/thing:4731219

This is a playing card shelf/stand/display that can hold up to 12 poker playing cards on each section. Great for displaying your cards.

There are currently 4 different files:

fullBrick_single : this is a single shelf section that has an equal thick side on all four walls

fullBrick_double : are basically 2 singles that are fused together so that you would not have to do any gluing.

fullBrick_ends / fullBrick_middle : used to make 2+ level shelves. The fullBrick_ends have one side that's half-thick so that when stacked together the two half-thick sides make it the same thickness as the other sides. The fullBrick_middle has two half thick sides so you can put it in between two ends or 1 end and 1 middle piece.

All the files that say split in front are the same files like the others but are cut in half so that they will fit on more printers. You will have to glue two of the half pieces together. 

Full Brick Playing Card Shelf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4731219.

There is also a 12 deck /full brick version here: https://www.thingiverse.com/thing:4801793

Make sure to upload a picture of your display so everyone can see your collection!

If you are unable to print it i sell them on etsy here: https://www.etsy.com/listing/970345928/3d-printed-playing-card-stand

This a shelf/display for poker-sized playing cards. It is able to fit 8 decks of cards per shelf and is a modular design so you can stack/glue as many on top of each other as you want.

modularShelf_ends: can be used with modularShelf_middle to make 3+ high shelves
modularShelf_middle: goes in between 2 modularShelf_ends so that it has the same width for each wall. (top and bottom walls are half-widths)

modularShelf_2stack: is a complete shelf with only 2 shelves so you don't have to glue two of them together ( will fit on larger print beds laying on its back, fits on my ender 5 if I set bed adhesion to off)

modularShelf_single: is a standalone shelf with the same width walls on all four sides. (wouldn't use this if you plan on stacking them as it would make the top and bottom walls between twice as thick as the side walls)

If you want to see any additional files let me know in the comments and I can probably add them.

Feel free to leave a tip if you like the design, enjoy! 


8 Deck Stackable Playing Card Shelf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4776645.

This is a diagonal playing card stand that is modular so that you can mix and match and create your own display.

There are three different stands the left, right, and middle. Each one has different edge sizes so you can create larger or smaller gaps between the cards when you set it up. You can use the photos as examples.

The shelf_support is sized so that you can glue it onto the bottom of the shelves to raise it above the ones in front of them (you can glue more than one of them together to raise it above the 2nd level) but you could always make your own riser if it is not the right size for what you are trying to do.

If you have any question let me know and be sure to post a picture once you set it all up!


Diagonal Playing Card Stand

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Llama_

Achievements

Seedling

Debutant