Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4801793.
*The photo only shows 8 decks on the shelf, but the current files hold 12 decks. I haven't had time to print the actual files listed but will update the photos when I do. The photo is from this file I created: https://www.thingiverse.com/thing:4731219
This is a playing card shelf/stand/display that can hold up to 12 poker playing cards on each section. Great for displaying your cards.
There are currently 4 different files:
fullBrick_single : this is a single shelf section that has an equal thick side on all four walls
fullBrick_double : are basically 2 singles that are fused together so that you would not have to do any gluing.
fullBrick_ends / fullBrick_middle : used to make 2+ level shelves. The fullBrick_ends have one side that's half-thick so that when stacked together the two half-thick sides make it the same thickness as the other sides. The fullBrick_middle has two half thick sides so you can put it in between two ends or 1 end and 1 middle piece.
All the files that say split in front are the same files like the others but are cut in half so that they will fit on more printers. You will have to glue two of the half pieces together.