Yuna is really fun to handle and have her curl up in the palm of your hand! Everything that is included in today's release:

🦊Yuna Flexi 🦊Yuna 3MF 🦊Yuna Straight version and 3MF

Yuna was tested down to 50% however I don't recommend going smaller than 70%. I found the arms to stick a bit at that scale, wiggling back and forth helps get them loose again!

I included a straight position version so that more of them can be fitting onto the plate! This is helpful when printing the 3MF files as you get more prints for the same amount of waste, it is also helpful when you'd like to push more gradient changes from a gradient filament.

Please make sure that when you are editing the 3MF that you are NOT painting the eyes the ears with the paint tool. They are split to parts and painting them will create uneven paint lines. Instead please assign color to them from object list located in the left side panel.

Also if you are using bambu studio please make sure you are double checking your profiles as the 3MF will load a default A1 mini plate and settings.

Filaments used:

Red Yuna: Isanmate red orange matte gradient, Hatchbox Sparkle Grey, Ziro white pro

Grey Yuna: CookieCad Gray Ombré, CookieCad Pale Pink Elixir, Hatchbox Sparkle Black

Blue and Pink Yuna: Cookiecad Blue Ombré, Ziro Twinkling-pink, CookieCad Lavender Chip Marble, Ziro Starry Sky

As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision.