🌸 Woobu Bloom 🌸

• 3 walls, 15% gyroid or 3D honeycomb infill, no supports

• Tested down to 60% for the print in place version, I don't recommend scaling the keychain or the print in parts version down

• Please ensure that the cap for the flower is tight fitting and use glue to keep it securely in place for both woobu and the flower spinner. If its not fitting tightly scale the cap down by 2%

• If the flower doesn't spin freely increase scale by 3%

• I recommend printing the face parts with 0.12 layer height

• For the keychain version scale all the flower parts to 80%

Editing 3M

• Avoid using the slicer's fill tool when coloring the faceplate, eyes, and nose in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects. 



• Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

You can get the flower spinner in the pictures here - Flower Spinner

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
 + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available from my profile page - Click here📌