Spooky cup prints in 3 parts! The cup, the bottom trim, and the lid! This way they can be printed on a single color printer! I have also included 3MF version for the cup and the lid! The lid comes with a hole that can be used as a pencil holder, or without a hole.

There is going to be tolerance variation when it comes to the lid! I've noticed on my printers that some lids feel a bit looser or tighter when printing them in different filaments and sizes, there is likely going to be tolerance difference between different printers as well. If you find that your lid is loose I would scale the lid up by 0.5%. The lid should not fall off when the cup is flipped upside down, it should sit securely in the cup.

For 120% and 150% scale cup, I recommend scaling the Lid to 101% this will help combat the bigger tolerances that comes with scaling things up. I recommend doing a test in single color to make sure the lid tightness is where you'd want it to be before printing the 3MF.

The skelly and beasty pixie fit into 120% scale cup, however its a bit too small for the bat which you would need to scale the cup to 150% for that one.

I recommend gluing the bottom trim onto the cup if you choose to use it.