Have you ever wanted a pet raven? One to sit on your shoulder? This is your chance! If you print a bunch of them you can even have an unkindness (which is what you call a group of ravens) Yaay!! who doesn't want an unkindness?

You will receive two versions of the friendly raven fidget, one of which can even hold your shiny things like rings!

The feet can pop in and out, the raven is also able to stand on its feet by giving the feet a pull and a gentle twist!

Tested down to 60% and no supports required!

This model is for PERSONAL USE ONLY, if you want a commercial license and access to more awesome models you can get it on my patreon https://www.patreon.com/Layersingreen

3D printing settings I recommend printing these models with at least 3 walls to ensure durability! Please take your time taking the prints off the build, if too much force is applied too quickly the feet could risk snapping! If using a flex sheet always flex outward, peeling the print off slowly and gently is always best!

Tested down to 60% with great results! No supports are needed for either model! The beak is set at a higher angle good cooling is required for a smooth print, you can face the model with the beak towards the cooling fans to help with the incline.