Ive been working on trying to create a snap fit head joint for sometime, I'm happy to share Lochi today with her new head joint!

🐚 Lochi 🐚

• 3 walls, 15% gyroid or 3D honeycomb infill. No supports.

• Head prints separately and should be pushed into the body

• Tested down to 80% scale

• Make sure to test the head joint with single color prints first!

• The head might take a bit of wiggling back and forth to fit, I wanted to make sure that it was secure once it is in. If you are having a hard time popping it in try scaling the head up 2%

Editing 3MF

• Avoid using the slicer's fill tool when coloring the eyes, eye shines, and fin in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects. 



• The eye shines can be deleted by holding ALT on your keyboard and clicking on them in prepare tab, then right clicking and choosing delete from the drop down.

• Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐ + +

📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available from my profile page - Click here📌