Kaida and Egg

Meet Kaida the little dragon and her egg!

This release includes: 🐉 Kaida 🐉 4 color prepainted 3MF 🐉 2 color prepainted 3MF 🐉 Kaida's Egg 🐉 Filament and 3MF illustrated guides

I have included a guide on how to edit the colors of the 3MF where possible. The only one I believe I didn't include was the single color rainbow which was printed in Eryone matte watercolor PLA

This model is for PERSONAL USE ONLY, if you want a commercial license and access to more awesome models you can get it on my patreon https://www.patreon.com/Layersingreen

Printed model is not suitable to be handled by children under 3 without supervision

Check out my kitty flexi design: https://cults3d.com/en/3d-model/art/kitty-flexi

3D printing settings Kaida was tested down to 50% however I don't recommend going lower than 80% I have also printed it at 145% which is the single color rainbow in the pictures! I loved her at that size! The egg should not be scaled down, due to the thin walls!

There are two 3MF files, one for a more complex 4 color paint, the other is a simple 2 color paint.

100% Kaida fits into 100% egg, all the multi color prints from above are all 100% including eggs. The fit is tight and you will need to arrange her into a certain position to make her fit and close the egg. The top of the egg functions by gently squeezing it to fit the pegs into their spots on the bottom section. Please refer to this quick video to see how I place Kaida in her egg

--> youtube.com/shorts/qDkEZ7a8zXY

None of the files in this release need supports to print! I do however strongly recommend using a brim when printing Kaida! especially so when printing in multicolor. And as always 3 walls is also strongly recommended