✨ Ferret Flexi ✨

• 3 walls, 15% gyroid or 3D honeycomb infill. No supports.

• Tested up to 177%, I don't recommend going below 70%

• Please use Brims with a brim gap of 0.3 if you are using Textured PEI plate, especially so if its a multi color plate. A little bit of post printing clean up is better than losing the plate due to adhesion issues.

Editing 3MF

• Avoid using the slicer's fill tool when coloring the eyes and eye shine in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects. 



• The eye shines can be deleted by holding ALT on your keyboard and clicking on them in prepare tab, then right clicking and choosing delete from the drop down.

• Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

The froggy bed can be downloaded for FREE here - Froggy Catch All Dish

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
 + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available from my profile page - Click here📌