Terrifying T-Rex - Articulated Fidget T-Rex - Ludo animal
The Terrifying T-Rex
This Fidget T-Rex is designed to be printed with no supports. All the joints articulate right off the build plate.
Printing This print requires a multi-color printer (unless you want to hand-paint the model). Use the included Easy Print File for the pre-colored model to make printing easier!
Print at 0.2mm layer height. Use adaptive layers to get a smoother top surface on the belly and face. For a higher quality feeling print, print at 20-25% infill.
Keychain Version This model is available with a hole cut for keychains. (Provided in the Easy Print 3mf only) Key chain
Filaments I Used: Some of these contain affiliate links
Black: Bambu Matte Charcoal Green: Bambu Grass Green Yellow: Bambu Lemon Yellow White: Bambu Matte Ivory White
Terrifying T-Rex - Articulated Fidget T-Rex - Ludo animal
Ludo Havanese -Articulated Fidget Dog
Labradoodle - Articulated Fidget Dog
Ludo Pug - Articulated fidget dog
Popsicle Clicker
Buck-Tooth Beaver - Articulated fidget beaver
Ludo Boarder Collie - Articulated Fidget Dog
Ludo Springer Spaniel - Articulated Fidget Dog
Grumpy Goose - Articulated Fidget Goose
.png&w=3840&q=75)
Ludo Chihuahua - Articulated fidget Dog
Pecky Pigeon- Articulated Fidget Pigeon
Icky Iguana - Articulated fidget Iguana
Ludo Jack Russel - Articulated Fidget Dog
Squawking Seagull - Articulated Fidget Seagull
Ludo Pomeranian - Articulated Fidget Dog
Husky - Articualted Fidget Dog
Able Alien - Articulated fidget alien
Merry Meerkat - Articulated fidget Meerkat
Doberman - Articulated Ludo Dog
Italian Greyhound - Articulated Fidget Dog
I can’t get this to print for anything on my a1 with the provided file.
Hi, what exactly is happening with it? I test printed this on my A1 and had no issues, but I would be happy to help figure out the issue you are having
layer shifts and bed adhesion? Are you using supports or glue or anything?
No supports. Make sure your build plate is washed with dish soap and warm water, raise the plate temp 5-10*, slow initial layer speeds (20mm/s for First Layer, 50mm/s for First layer infill), and if it still gives you issues, I would add a bit of Elmers glue to the plate
Trying this. Will let you know how it turns out
what the smallest and max size you can scale most of the flexis? Including this T-Rex. Thanks!
Hi, we have not tested the models scaled up or down, so we cannot guarantee them at any size besides the provided file size. However, you are welcome to run your own tests on them.