Ludo Corn dog spinner

The Ludo Corn Dog spinner clicker is addictively fun, It spins and clicks! You only need to snip plastic standoffs if your clickers have them. This model will fold over electrical prongs as you press the clicker into place, so no need to snip those!

Assembly

• Press the bearing into the bottom of the corn dog
• Press the stick though the bearing
• Slide the bottom of the corn dog over the stick and glue in place (make sure glue does not get on the bearing
• Glue the Mustard in place (line up the dots)
• Press the keyboard switch into the top of the corn dog
• Press the hot dog down onto the keyboard switch

Clicker This design will work with most 3 pin plate mounted keyboard switches. We Recommend.. Kailh Box White Clickers are the best.

Spinner Bearing Fidget Spinner Bearing

Printing

Print at 0.2mm layer height. Use adaptive layers to get a smoother top surface.

Filaments I Used: Brown: Bambu Matte Caramel Brown: Bambu Desert Tan Yellow: Bambu Matte Lemon Yellow Tan (stick): Bambu Matte Desert Tan Red (hot dog): Bambu Terracotta