X-shot Ragefire Chain links
520 downloads · 3 years ago · These links are intercompatible with the originals, and are even more flexible.
Requires no support
These links are intercompatible with the originals, and are even more flexible.
Requires no support or post processing
Just print them out, snap the Clip onto the link and carefully clip them to the others.
I recommend PLA+ by eSun. the orange variant even looks similar to the "Nerf orange".
have fun building a ridiculously long chain!
X-Shot Recoil brass barrel and visual mod
Zuru X-Shot Chaos Orbit picatinny adapter pump grip replacement - 120 mm
X-Shot Longshot Trivictus SCAR
Zuru X-Shot Chaos Orbit picatinny adapter pump grip replacement - 150 mm
Zuru X-Shot Chaos Orbit picatinny adapter pump grip replacement - 90 mm
x shot chrusher chain easy
Chain Link Gridfinity Bin 1x2 40mm
Chain Link Gridfinity Bin 1x2 60mm
Chain Link Gridfinity Bin 1x2 100mm
Chain Link Gridfinity Bin 1x2 80mm
Chain Link Gridfinity Bin 60mm
Chain Link Gridfinity Bin 40mm
Chain Link Gridfinity Bin 80mm
Chain Link Gridfinity Bin 100mm
Chain Link Gridfinity Bin 2x2 (60mm)
Chain Link Gridfinity Bin 2x2 (20mm)
Chain Link Gridfinity Bin 2x2 (80mm)
Chain Link Gridfinity Bin 2x2 (40mm)
R7 Hype Chain | Chain Links | Teacher Appreciation | R7Makers
Yo could you make or tell me if there is a version with multiple of these so i can get it one peint?
Print*
This Amazon store might be selling your design. I'm not sure if they have rights.
https://a.co/d/4r28geN
ChuckTech
Detailed Seller Information Business Name: MIMIC CYBER SOLUTIONS LLC Business Address: S42W25057 Oak View Dr WAUKESHA, WI 53189 US
they do not, i'll look into it
What infill, and infill pattern?
Thanks boss. My son was wanting an extra belt. We just got an old 3d printer from a friend. Hopefully it does the trick.
hey really cool how do they work on half darts? I'm trying to half dart mod the thing with better aligned and compatible belts first.
and any other mod ideas!
i had many doubts but it works with little supports
You stated that you do not need supports for this yet the slope angle on the back of the Nerf dart tube is pretty steep are you sure this is going to print ok? You didn't include any pictures of the back of the tube.
worked on all of my ender series printers at 0.2mm
What printer would you recommend to print this on?
it worked on my Ender 3 (the very old one)
do i have to snap the link and clip together?
yes, you do. says it in the description. if they're not holding together, i recommend gluing them.
how are you arranging the print for these with no support?
i printed the "barrel" with the open side facing up, and the clip with the flat side down. i think you can see how i did it in the picture.