Hi All
For the relaese of the new Ghostbusters movie, i desinged this shadowbox using hueforge.
Please make sure to follow the print instrucions if you ar not using the 3mf file
Only plate 2 have an other layer height of 0.04mm
Plate 1 - Back Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Start with Black At layer #7 (0.64mm) swap to Blue At layer #14 (1.2mm) swap to Ice Blue or cyan At layer #20 (1.68mm) swap to White for the rest.
Plate 2 - ECTO 1 Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Start with Black At layer #10 (0.52mm) swap to White At layer #20 (0.92mm) swap to Red At layer #33 (1.44mm) swap to Black At layer #42 (1.8mm) swap to Jade White for the rest.
Plate 3 - Ghost Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #15 (1.28mm) swap to light blue or cyan At layer #20 (1.68mm) swap to White for the rest.
Plate 4 Ghostbusters Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #13 (1.12mm) swap to Gray At layer #20 (1.68mm) swap to White for the rest.
Have fun printing and dont forget to share your makes