This is a simple to use foam dart cutting jig. The main purpose of this is to cut darts in half for use with shell fed blasters, like the Battle Axe that uses Silly Shells.

There are two parts:
Main body: where the dart sits and provides a tin slit to fit a breakaway razor.

Depth Fence: slides into the main body and can be secured in place by one M3x20 bolt. Allows you to set where on the dart to cut and lock it in for repeated cutting.

Print settings: PLA is fine, or PETG. Print at 0.2mm height with 3 walls and 10% gyroid/crosshatch infill.

For the depth fence: You can either print this part separately from the main body OR… 
In your slicer, isolate the part in the ‘per object’ settings. (In bambu/orca slicer, that's the switch from global to objects. See Screenshot.) Change the print speed for the outer most wall to 20. This is to prevent inconsistent extrusion once the main body is done printing. There is still a bit of the guide rode ABOVE the main body and your printer will slow WAY down once it gets to that point. It causes a bit of a bump that makes things difficult to fit together. Setting it 20 for outer wall will make it consistent all the way up.

This jig is large enough to handle a Nerf Mega XL dart. You can cut any size dart in the jog. Just hold the dart against one of the walls and the fence while cutting. 

Note: The tolerances are TIGHT on the main body and razor blade thicknesses vary. If you have difficulty fitting your razor blade in the slot, scale up the main body by 1-3%.

Enjoy!

Foam Dart Cutting Jig for Shell Fed Blasters

Dart_Jig_Main_Body.stl

Remix of Hakko Soldering Station Holder for Multiboard by Jc Miñarro

I love this idea, but I wasn't a fan of the 'Peg' style mounting, so I remixed it to take advantage of the MultiConnect system (https://www.printables.com/model/716558-multiconnect-generic-connector-for-your-board)

It's easier to mount and to move, it's also much stronger. You'll need 4 of the multiconnect screw in adapters to mount this.

I've only modified the main station holder because I move my iron holder around my table a lot. If there is any demand for a remixed iron holder, I'll make one.

Remix of Hakko Soldering Station Holder for Multiboard: Uses MultiConnect

Hakko Soldering Station Holder - Part A.3mf

Proudly display your name/handle on this custom 3D printed RMRRF name tag! 
There is a slot in the back to fit these magnets: https://amzn.to/3PLKSpM

3mf precolored for Bambu/Orca Slicer

Huge thanks to LayerXLayer for designing the awesome logo! https://thangs.com/designer/layerxlayer

Rocky Mountain RepRap Festival Name Tag w/magnet slot

RMRRF-NameTagV2.3mf

Remember the era of exchanging Maker coins? It was a fun way to exchange little prints with other makers. However, it wasn't very useful other than a fun little trinket. 

Introducing the Maker 'Chip'! Adhering to the size of a standard Poker chip, you can put your logo on one side and a QR code to your links/website of choice on the back! It's the maker coin meets business card!

So many people now have the ability to print multi-color, so it's a great time to transition to a useful design you can hand out at events.

The model here is just a flat, blank chip. You can customize it within a slicer. 

The New Maker Chip! A Maker coin that checks all the boxes!

Maker_Chip_Base.stl

Maker_Chip_Inlays.stl

Hakko Soldering Station Holder - Part B.3mf

Hakko Soldering Station Holder - Part C.3mf

Hakko Soldering Station Holder - Peg Click.3mf

Old dog of 3D printing.

I'm not sure what to do with my hands...

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

JoeMikeMakes

Achievements

Seedling

Novice Maker

Voyager

Rising Star

Debutant

Pinned models

The New Maker Chip! A Maker coin that checks all the boxes!

Remix of Hakko Soldering Station Holder for Multiboard: Uses MultiConnect

Foam Dart Cutting Jig for Shell Fed Blasters

Remix of Hakko Soldering Station Holder for Multiboard: Uses MultiConnect

Rocky Mountain RepRap Festival Name Tag w/magnet slot

The New Maker Chip! A Maker coin that checks all the boxes!