| Visit JERRARI.com for Instructions and a complete look at the GEN2 collection
The Essential Series is a collection of drawer faceplates for the GEN2 Decor Series. Simply print the drawer bodies HERE, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with an M3 screw and nut.
The key feature of Essential series offers is the ability to customize the faceplate easily in a number of way. With a flat surface you can print with different textured beds for pleasing appearance or add logos, designs, or text within your slicer.
Faceplates are available in two variations, a single center hole for knobs or a two holes for handles. Oh right! let's look at available handles so you can see what's available.
Update 10/3/2024: V1.1 - Slightly larger to cover top and bottom gaps in drawer cases
What You'll Need
BASE DRAWER MODELS • GEN2 Decor Drawers - Standard - DOWNLOAD
HANDLE/KNOBS • BlockBar Series - DOWNLOAD • Crystal Series - DOWNLOAD
HARDWARE Includes affiliated links to help support my projects • Filament - Poplar Wood Filament (this is what I used in many of my photos) ps. use hardened nozzle for abrasive filaments. • M3 nuts and screws: M3x6 - M3x10- I prefer this kit
INSTRUCTIONS • Push M3 nuts into slots on handles/knobs
• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.