Candy Cane Keychain Blaster — Functional blaster toy

Keychain blaster in the shape of a candy cane. Shoots 6mm airsoft BBs!

Printing tips: Print with the flat side down, no supports should be required.

Unfortunately to get color for this print, you have to have a multi-material system. Or of course you can paint it yourself!

If you use Bambu Studio or OrcaSlicer, a handy print project file with painted parts are included!

Assembly: Use pieces 1.75mm filament as alignment pins and glue the two halves together! Then glue the Front Ring around the cane!

Insert a 20-25mm long, 5mm diameter spring in the barrel, then push the Firing Pin in. Finally, screw a M3 bolt at least 8mm long into the Firing Pin hole.

If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. Please check out my membership plans! ❤