Jouni A

Candy Cane Keychain Blaster — Functional blaster toy

by
Jaatinen3D
Follow
Follow
Remix Model
Jaatinen3D
Jaatinen3D
|
Image 2 of 3
Candy Cane Keychain Blaster — Functional blaster toy 3d model
Jaatinen3D
Jaatinen3D
|
Image 2 of 3
Candy Cane Keychain Blaster — Functional blaster toy 3d model
2D
3D
Makes
Candy Cane Keychain Blaster — Functional blaster toy 3d model
Candy Cane Keychain Blaster — Functional blaster toy 3d model
Candy Cane Keychain Blaster — Functional blaster toy 3d model
This model is restricted by licensing terms. 

Keychain blaster in the shape of a candy cane. Shoots 6mm airsoft BBs!

 


Printing tips: Print with the flat side down, no supports should be required.

Unfortunately to get color for this print, you have to have a multi-material system. Or of course you can paint it yourself!

If you use Bambu Studio or OrcaSlicer, a handy print project file with painted parts are included!

 


Assembly: Use pieces 1.75mm filament as alignment pins and glue the two halves together! Then glue the Front Ring around the cane!

Insert a 20-25mm long, 5mm diameter spring in the barrel, then push the Firing Pin in. Finally, screw a M3 bolt at least 8mm long into the Firing Pin hole.

 


If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. Please check out my membership plans!


28 Likes45 DownloadsDecember 8, 2024


28 Likes45 DownloadsDecember 8, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density15 %
SupportsNone
BrimNo