The Grinch Ornament Multiparts / Easy Print

This ornament features the iconic Grinch wearing a classic Santa Claus hat, complete with a naughty expression that hints he’s up to no good.

I designed this model so everybody can enjoy it in colors even if you have a single color 3d printer! It´s also very easy to print, and it only needs a few supports on the red part of the hat, everything else prints without supports.

This ornament prints in separate parts, allowing for multi-color customization, but also single piece files for multicolor printing.

Including:

-Grinch head -Scarf -Nose -Eyes (Set a pause on your printer to print the top of the eyes black) -Hat top and bottom -Pre configured 3MF Factory Files for Bambu and Orca Slicers to print by parts with and AMS and also without an AMS and also in a single piece with an AMS. -Includes easy to paint STL files that works on most slicers. Use the bucket tool but remember to turn on edge detection to the maximum before you start painting it.

The assembly is simple—just print the pieces in your preferred colors and glue them together (I like to use Loctite Superglue)

"All of my models are for personal use only, unless you are an active subscriber with a commercial license."

➡️ https://linktr.ee/ik3d

3D PRINTING SETTINGS:

-Super easy to print, only the ¨top hat¨ file needs a few supports.

-2 Walls, 7% rectilinear infill and 0.16mm layer height or lower. Use a brim for the head, eyes and nose.

-To glue the parts together, I like to use Loctite Superglue.