There are hundreds of wireless charging stands out there but none of them were able to accomplish exactly what I needed. My criteria were:

Criteria:

• Charge phone (88mm wide x 12mm thick) and Airpods simutaneously
• Must be easy as placing my phone down and it starts charging, no finnicky positioning.
• I'm not the kind of guy to drop $200 on a nightstand accessory.
• I need a good place to keep my airpods as I am almost always misplacing them, the airpods must be relatively secure

I designed this to satisfy all of my criteria. There are three "top" plate options for various configurations. This project also evolved into a dual airpod charging stand. You can even create "his and hers" airpod chargers.

Put it in your living room, your kitchen, your desk at work, your bedside table.

Configurations

Config 1: "Regular" sized phone + single airpod case

Config 2: "Plus" sized phone + single airpod case

Config 3: dual airpods charger

BOM

Hardware: Belkin Quick Charge Dual Wireless Charging Pad (non affiliate link) https://www.amazon.com/Belkin-Wireless-Charger-Charging-AirPods/dp/B086ZBQ6QR/ref=asc_df_B086ZBQ6QR?mcid=a82c7337d89c3f5086ccfc78b4e76374&hvocijid=5145724200062771742-B086ZBQ6QR-&hvexpln=73&tag=cults0d-20&linkCode=df0&hvadid=730434204848&hvpos=&hvnetw=g&hvrand=5145724200062771742&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9010276&hvtargid=pla-2281435178858&psc=1

Same wireless charger in black https://www.amazon.com/Belkin-Wireless-Charger-Charging-AirPods/dp/B086ZB652Y?tag=cults0d-20

4x M4 x 16mm socket head screw (if you dont have 16mm, a 20 would work too but the threads will overhang) 4x M4 nuts 4x M3 x 8mm countersunk screws 4x M3 square nuts (I tend to use square nuts with M3 hardware to prevent spinning when tightening) ** NOTE ** For the dual airpod setup, 8 screws and nuts can be used, but 4 is alright as long as they are installed in a diagnal pattern. Feel free to use 8 if you prefer a "complete" look

Printed parts:

Config 1: Regular phone size

• 1x Regular Size Phone Holder.3mf
• 1x Angled Stand.3mf
• 1x Belkin Base.3mf

Config 2: Plus phone size

• 1x Plus Size Phone Holder.3mf
• 1x Angled Stand.3mf
• 1x Belkin Base.3mf

Config 3: Dual air pod

• 2x Dual airpods.3mf (Print two! seperated so you can have seperate colors for each airpods user if desired)
• 1x Belkin base.3mf
• 1x Short Stand.3mf