I went looking for a poop emoji to re-use but only found them as STL files which are hard to work with, so I made my own to use and also provide this in other formats for everyone.

This poop emoji is based on my poop model. There are separate solid, hollow and magnetic versions supporting either 5x2mm or 6x2mm disc magnets.

Printing

The model is large and intended for you to scale down in your slicer or CAD software, the normal size is about 24cm wide.

The Bambu version is already scaled down to 25%. The magnetic version is already scaled down and not re-sizable without losing support for the magnets.

They are made to be printed directly on the print bed in normal orientation with no support. There is a Bambu Studio painted file available as well as a normal 3MF. I used a 0.4 nozzle with a 0.2mm layer height for everything.

The colours I have used in my print above are all Extrudr NX-2 matte colours - brown, grey and black.

Magnets

If you have chosen a magnetic version for safety purposes put a small amount of glue on the magnets before insertion.

The gap may or may not be tight depending on tolerances on the magnet/hole so the easiest way to do this is to put the magnet on the back of a metal spoon, dab the glue, carefully align the magnets over the holes and apply pressure. It should pop right in.

If you find this model useful it would be great if you can support me by subscribing to me here, thank you.