Brackets to use with your Multiboard tiles and wooden dowels/closet rods to store filament spools.

The brackets are designed to fit 1.25" wooden dowels/closet rods that can be found at your local hardware store. I've also included a 20mm version. Let me know if anyone needs to a different diameter and I will post additional print profiles that fit your needs.

The brackets use push-fit pegs and are threaded from the rear with the Multiboard small threads. The intended use is to place the top peg through a Multiboard Weight-bearing snap and use one of my remixed [Multiboard T-bolts](https://than.gs/m/1052045) that anchor the bracket securely to the Multiboard tile. For the bottom peg, I use an offset snap on the Multiboard tile so the bracket is supported against the wall and minimizes flex in the Multiboard tile.

For additional pictures on how to mount the brackets, please visit: https://makerworld.com/en/models/473226#profileId-383234
(If you like my designs, please support me by downloading from Maker World. Thanks!)

Filament Spool Rack for Multiboard

Spool Bracket Multiboard 1.25inch.3mf

The wife needed some sturdy trellises for her house plants. Nothing that I found quite fit the bill for what she was looking for, so I quickly made my own.

**Customizable:** Print the ladder piece and use by itself or connect multiple together using a couple of options.

**1. Pegs:** small pegs fit inside the ends of the ladder pieces to connect 2 ladders together or use as spikes to plant the ladder in the dirt. They do work but are a little flimsy.
**2. Connectors:** These slip over the ladder ends to connect two ladders together. Much sturdier. Tolerances built into the model to allow for an easy fit, depending on your print settings. If it's too loose, you can always use a little glue.
**3. Spikes:** two difference lengths provided, 80mm and 40mm. These are intended to be placed on the ladder ends to hold the trellis up in the dirt.

All pieces are meant to print as oriented in the file. No supports or brim needed, as long as your build plate is clean.

Ladder Trellis - Modular

Ladder Trellis.3mf

**Version 2 Changes:** Modified frame to take up less real estate on the Multiboard tiles.  Added some texture to the frame for aesthetics.  Roller and axles remain unchanged.

**Multiboard Mounted Spool Roller/Holder**
Spool roller for Multiboard system.  I designed this to hold spools for my Bambu XC1 that aren't compatible with the AMS.

Consists of four parts for easy of printing, and uses two 608 bearings on the axles.

Attaches to Multiboard tiles using two push-fit pegs.  You can use existing offset snaps used to mount your tiles to the wall or any other snaps.  I prefer to use the [Weight-Bearing Directional Snaps](https://than.gs/m/989145).  The push-fit pegs include small-threaded holes, so you can utilize my [remixed T-bolts ](https://than.gs/m/1052045) to secure the spool roller even more.

**Print Settings**
Use standard Multiboard print settings, 0.4mm nozzle, 0.2mm layer height, 3 walls, and 15% infill.  You can increase the main frame's infill to 30% for extra strength, but not really necessary.  Orient the parts on the print bed as shown in the 2nd photo.

**Main Frame:** Designed to be printed horizontally, like it would hanging from the Mutliboard tile.  It can be printed without supports, but I recommend using supports on the push-fit pegs to guarantee a perfect fit.

**Roller and Axles:** Print oriented vertically, no supports required.

**Assembly**
Insert the axles into the roller.  The tolerances are tight, but they should push-in with a little effort.  Slide the 608 bearings onto each axle, then the roller assembly should fit into the frame.  The bearing should snap lightly into the frame. Again, the tolerances are tight, but if everything is aligned correctly it fits together easily and rolls without resistance.

Please check out my other models here and on Makerworld.
[Multiboard AMS Shelf Brackets](https://than.gs/m/1054307)

**Remixed Multiboard T-bolts:**
- [20mm thread, with 15mm offset](https://than.gs/m/1050484)
- [13mm thread, with 15mm offset](https://than.gs/m/1052039) 
- [20mm thread, with 8mm offset](https://than.gs/m/1050483)
- [13mm thread, with 8mm offset](https://than.gs/m/1052045)




Multiboard Filament Spool Roller

Spool Holder V1.0.3mf

For additional information and detailed pictures of how to mount, please visit my model page on [Makerworld Multiboard AMS Shelf and Build Plate Holder](https://makerworld.com/en/models/425880#profileId-329591).  Help support me by liking and downloading.

**Plate Holder**
The plate holder is designed to fit on the inside of the [AMS Shelf Brackets](https://than.gs/m/1054307), by attaching to the Multiboard brackets. The plate holder holds up to four plates, in a staggard fashion so you can easily see and grab the plate you want. You can add multiple pairs of plate holders and stack them on the shelf bracket and hold as many plates as you want (within reason).

For multiple plate holders, stagger the holders 2 Multiboard units apart.  You can swap the left/right holders to opposite sides of the AMS Shelf Brackets if you'd rather have the top plate sticking out the furthest or vice-versa. 

I used Multiboard double-side snaps (part A) on the plate holder so you can use the [Part B](https://than.gs/m/974407) on the outside of the brackets for a nice, clean look. This also means you can use these snaps to attach other things using the same mounting point on the outside using push-fit pegs or medium threaded bolts. 

**Warning: the snaps pieces on the Plate Holder are delicate!** I increased the tolerances on the snap fittings to make it easier to push in, but I recommend laying the bracket on a flat surface and pushing the Plate Holder straight into the Multiboard tile, or else risk breaking the snap attachment on the plateholder.

Multiboard AMS Shelf Plate Holder

AMS Multiboard Shelf Plate Holder double sided snap V1.0.3mf

For additional information and detailed pictures of how to mount, please visit my model page on [Makerworld Multiboard AMS Shelf and Build Plate Holder](https://makerworld.com/en/models/425880#profileId-329591).  Help support me by liking and downloading.

Also available: [AMS Multiboard Shelf Buildplate Holder](https://than.gs/m/1054310)

**AMS Shelf Brackets**
AMS shelf brackets for use with the Multiboard system.  The AMS shelf brackets consist of left and right brackets with integrated Multiboard tiles. The brackets require at least 2 Multiboard 8x8 tiles for mounting and should be spaced 14 holes apart (left to right) and the pegs are 8 holes apart from each other (vertical).

Printed using standard Multiboard print setting.  While it can be printed without any supports, **supports are recommended**, otherwise you will be cleaning up stringy leftovers around the push-fit pegs.

**Mounting to your Multiboard**
The brackets attach to your Multiboard tiles via push-fit pegs that fit into Multiboard snaps. The brackets are then secured with t-bolts from the back. Use my Multiboard remixed t-bolts [Multiboard T-Bolt 25mm head, 13mm length with 8mm offset](https://than.gs/m/1052045), that lock the bracket into the Multiboard tile from the rear and also act as additional tile support against your mounting surface. Please visit the t-bolt model page download what you need there.

I personally use a [Multiboard Weight-Bearing Directional Snap](https://than.gs/m/989145) (normal snaps work fine as well) with one of my [t-bolts](https://than.gs/m/1052045) on the top of each bracket. On the bottom pegs, I use the [Multiboard 8 mm, T Mounting Offset Snap - DS Part A](https://than.gs/m/974340) snaps mounted to the wall for additional support, as there's not much worry about the bottom pegs pulling out.

Depending on how you've mounted your Multiboard tiles you may want to add additional offset snap mounts anchored to the wall behind or around the brackets. I found it helpful to use a dual snap between tiles to prevent the tiles from flexing. The shelf brackets themselves are quite solid.

**I highly recommend making sure that you secure the tiles around the bracket with wall anchors to prevent flexing of the Multiboard tiles.** Again, the bracket themselves are rock solid and don't exhibit any flexing, but the tiles they are mounted to need to be solid themselves or the brackets and AMS will sag.

The spacing of the rear support is enough so that you can open the AMS cover enough to access everything you need.

Multiboard AMS Shelf Bracket

AMS Multboard Shelf Bracket V2.0.3mf

I designed this to use with my [Multiboard AMS Shelf Brackets and Plate Holder](https://than.gs/m/1054307)

This is a remix of the [Multiboard Small Thread, Plain Head, Shank T-Bolt](https://thangs.com/search/%22MB57%22%20creator%3A%22Keep%20Making%22?scope=thangs&view=list&affiliateCode=hendricks) with various use cases. 4 different variations are included here.
 
Advantages to this design:

1. The head of the bolt is 25mm wide, which enables the bolt to actually prevent a snap or shelf bracket to pull out of a Multiboard tile.
2. The head of the bolt also acts as a support offset, meaning that the head is meant to rest against the wall surface to provide additional support to the Multiboard tile, instead of flexing under the weight of a shelf bracket.
3. Bigger head make the bolt easier to tighten by hand.

Depending on your setup, you may be required to remove the Multiboard tile from the wall in order to install the t-bolt from the back.

There are 4 versions, all with 25mm wide heads:

- [20mm thread, with 15mm offset](https://than.gs/m/1050484)
- [13mm thread, with 15mm offset](https://than.gs/m/1052039) 
- [20mm thread, with 8mm offset](https://than.gs/m/1050483)
- [13mm thread, with 8mm offset](https://than.gs/m/1052045)

Use the offset length that match the offset snaps used to mount your Multiboard.

Multiboard T-Bolt 25mm head, 13mm length with 8mm offset for AMS Shelf Brackets

T-Bolt 25mm head, 13mm length, 8mm offset.3mf

Multiboard T-bolt 25mm Head, 13mm length with 15mm offset for AMS Shelf Bracket

T-Bolt 25mm head, 13mm length,15mm offset.3mf

Multiboard T-bolt 25mm Head, 20 mm length with 8 mm offset for AMS Shelf Bracket

Custom T-bolt 25mm Head, 20 mm length with 8 mm offset.stl

Multiboard T-bolt 25mm Head, 20 mm length with 15 mm offset for AMS Shelf Brackets

Custom T-bolt 25mm Head, 20 mm length with 15 mm offset.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

FroznBits

Achievements

Voyager

Seedling

Up and Coming