Criss Cross Dice Tower with dice tray - one piece - no supports

Was looking for certain kind of dice tower, that wasn't out there. One where the baffles directs the dice to hit off the side wall to give the dice a spiral spin. 
I thought i’d create this new kind of dice tower.

It is a dice tower with criss cross walls, uses Triangular Baffles to bounce the dice off the insides of the 4 walled tower, resulting in a clockwise dice roll.

[*] Designed to roll dices in clockwise spiral down the tower

- 3 directional baffles to bounce dice off the side walls,
- Final roll in the catch tray.

[*] Suits Dice of Do= 26 mm ( 1 inch ) outer diameter dice size, even your D30’s

[+] Designed to be printed upright, with no supports:-

[-] Max. layer height is 0.20mm - don’t go any higher due to slope angles, keep at 0.2mm or less.

[+] Designed for no infill:-

[-] Needs at least 4 or 5 top & bottom layers thickness - for corner strength, there lots of corners on this thing

[*] It is 210mm high expect 14+ hours or more print time:-

[-] Don’t scale it down, otherwise the tower won’t work, and some dice will get stuck. it needs sufficient spaces ‘bounce gaps’ to bounce dice off the walls.

[-] Don’t reduce the height, otherwise overhangs become too shallow and wont print.


Criss Cross Dice Tower

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

FresnelTHz

Achievements

Seedling

Criss Cross Dice Tower with dice tray - one piece - no supports