**Rocket Puzzle Box ** This Rocket Puzzle Box is the most insane way to gift someone sparklers. Take some sparklers or anything else you want to gift someone (like cash) and put it into the puzzle to keep the recipient occupied, annoyed, or maybe even amused. This is a relatively easy print and the supports are easy to remove as well.

**Printing: ** Fins-no supports Interior Container and Lid-container needs supports, lid does not Main Body-no supports nosecone-supports, optional color change if you want thumb screws-no supports, you must print three of these

**Before Assembling: ** You may have to put the screws a few times through the fins to make it easier to push through for the recipient. Adding onto that you should test all of the screws and threads a few times to make them work smoothly.

**How to Assemble: **

1. Put the sparklers or your choice of gift in the interior container
2. Line up the shortest of the three bulges in the interior lid to the gap in the bulge on the outside of the interior container and push down and rotate the interior lid
3. Put the interior container in the main body
4. Put the nosecone and reverse through the maze and into the interior body (this may take some time and if you are struggling you can cheat a little by looking at the CAD file)
5. Slide the main body which now has the interior container and nosecone in it into the fin assembly.
6. Rotate the main body while holding the fin assembly until the holes match up
7. Screw in the three screws (these are reverse threaded screws, so instead of Righty Tighty, Lefty Loosey it is Righty Loosey, Lefty Tighty.

**Licensing: ** No sharing or redistributing in any way of the 3D files or derivatives No remixing Non-commercial Use (only for personal use)