-- Still in development --
Prototype model to replace stock filter box of this robot vacuum:
[https://www.jula.se/catalog/hem-och-hushall/stad-och-kladvard/dammsugare/robotdammsugare/robotdammsugare-025972/](url)

With a stock HEPA filter from amazon such as this one;
[https://www.amazon.com/Electropan-Filter-Replacement-Robotic-Cleaner/dp/B0782T7L6P/ref=sr_1_4?crid=2X61H1VDISS6I&dib=eyJ2IjoiMSJ9.FgZMl1leFTDqu3os2KfF-H5fiNFaVFZqpMoSgKyTTLwhthmUn0teUO5jM96m1Rmhy-s8LWUGi-eto3wIhR-gQDr4R0vx7q_QMIk4oVrnkaScpFUk3NvbMlmdw_kBOCZgnQwbk2YPR1_13lNot3PqiB2bTTZ52LlNLFu_Y_5vaUpsUbCA1FoYH3A0yjfXznaIYKZxC1XLSRoQyZ35ogkee43v94PK8RTML87BiRelzA4.T0NOxf2qz7ld-FQC4nvopNjvZSze0KcJOpoe2PQAVFY&dib_tag=se&keywords=hepa+filter+robot+vacuum&qid=1721142416&sprefix=hepa+filter+robot%2Caps%2C242&sr=8-4](url)

Print settings:
3 walls
3-4 bottom/top layers
20% infill of your choice
Use supports (e.g. tree/organic supports)

Bright_filters_1.stl

Simple replacement impeller for Bright vacuum cleaner per this website;
[https://www.jula.se/catalog/hem-och-hushall/stad-och-kladvard/dammsugare/robotdammsugare/robotdammsugare-025972/](url)

Depending on your printers tolerances you may need to adjust the hole size a slight bit in the slicer. No supports needed.

If you find the original impeller difficult to remove, put two flathead screw drivers on either end and press it upwards. Its currently made to be a pressure fit on the axle as per the original

..Also, maybe its just me, but I think this one works a bit better than the original ;))

recommended settings:
3 walls
15-20% infill of your choice
print in PLA or whatever your filament of choice is 

bright_impeller.stl

bright_impeller2.stl

Please note! This project is still under development and may be subject for change!
This is Version 3 of the design as of June 2024
Version 4 was released 2nd July 2024

The "all in one" file contains all modules, the others are if you want to print them separately or do spares, or mod. You may need to orient them for printing.

This is a mod bundle for Ender 3 Pro allowing the use of magnets for partial hotend assembly and disassembly. But more over it allows the use and attachment of the direct drive humming bird extruder found here:
[https://www.printables.com/model/367706-hummingbird-extruder](url)
It also allows the use of a slightly taller bambu style hotend conversion using this style hotend: 
[https://t.ly/yIneQ](url)

We're also converting to using a 5015 blower fan - a basic 5015 fan duct is included in the latest version. See assembly instructions for more details :)

Version 4 changes:
- Easier mounting of direct drive mount to fanshround
- Improved clearances for mounting holes of the original fanshroud
- Includes a simple 5015 fanshroud that needs no support to print as a friction fit
- Improved clearance for the hotend inside the fanshroud 
- Improved(?) assembly instructions on final mounting procedure :)

Ender3-Pro-hummingbirdV3.stl

all-in-one.stl

5015-fanduct.stl

Some Creality Spider hotends are slightly taller than the standard one. This spacer combined with 2 M3x10 or 12mm screws are used to extend teh reach of the CR touch to fit these new hotends.

I suggest using ASA or similar filament, 100% infill. No support needed but a brim is helpful.

NOTE! Still in development! Changes may occur.

spider_cr_touch_mount.stl

A simple replacement part for the Wilo laddomat circulationpump of type: RS25/6-3 P.
Print with supports, brim and 100% infill.
PLA works. ASA though is perferable.

The metal part will fit very very tightly, you may want to either bend the plastic some or adjust your slicer settings if you find it too tight.

wilo-knapp.stl

A simple replacement part for the Wilo laddomat circulationpump of type: RS25/6-3 P.
Print with supports and 100% infill.

The metal part will fit very very tightly, you may want to either bend the plastic some or adjust your slicer settings if you find it too tight.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Eu_citzen

Achievements

Seedling

Bright_filters_1.stl

bright_impeller.stl

Ender3-Pro-hummingbirdV3.stl

spider_cr_touch_mount.stl

wilo-knapp.stl