[Instructions](https://prinnit.com/ForgeCore/design/3683r122rHEAMl6xlLBoN3sgjz3?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/3683r122rHEAMl6xlLBoN3sgjz3?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/3683r122rHEAMl6xlLBoN3sgjz3?section=filaments&highlight=filaments)

**Spinny Plant Pot** - _Beginner_ 
This Plant pot is not only aesthetically pleasing, its also fun and functional. It is made from two parts that spin together, and has a build in drip tray to prevent root rot.

These pots were designed in collaboration with Hendrick's Design, who makes nice looking plant pots.

This design was inspired by those spinning containers, but made functional as a plant pot. If there's interest, I can make more styles of this planter as well, with different exterior patterns, or taller so it spins more. 

Spinny Plant Pot - Twist Together Pot with Built in Drip Tray

1 - Easy Print 3mf - Spinny Pot.3mf

Inner Pot.stl

Outer Pot.stl

[Instructions](https://prinnit.com/ForgeCore/design/3684PNO8mkSijmWJ7KxQtMcRLVA?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/3684PNO8mkSijmWJ7KxQtMcRLVA?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/3684PNO8mkSijmWJ7KxQtMcRLVA?section=filaments&highlight=filaments)

**String of Pearls** - _Intermediate_

The String of Pearls Succulent is a popular houseplant because of its unique appearance. It is one of my favorite plants because of the way it dangles down. This model is designed this to articulate with ball and socket joints that snap together. It dangles nicely, and can be assembled to be as long as you like.

Put this in a hanging pot, and it will look awesome!

**Customizable:**

This is a very customizable print. You can print out as many segments as you want to make a very large or very small plant. There are Y branches so you can split segments into multiple branches, just like the real plant.

If you want, you can sell a smaller version by including fewer pieces, or large ones with more for a higher price. Or even sell them as kits, so customer can assemble them themselves!

The pot in these photos was a real pot that I had at home, I included an optional printable pot in the download that fits perfectly with the base, in case you don't have one the right size at home. 

String of Pearls Articulating Plant

1 - Easy Print 3mf - String of Pearls.3mf

Base.stl

Freebie - Flexy Caterpillar.stl

Pot.stl

Segment chain.stl

Y Branch.stl

[Instructions](https://prinnit.com/ForgeCore/design/369tf6PqVDb9dX8NJrBddZAHPe2?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/369tf6PqVDb9dX8NJrBddZAHPe2?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/369tf6PqVDb9dX8NJrBddZAHPe2?section=filaments&highlight=filaments)

**The Cactus Toothpick Holder** - _Intermediate_
This one took me soo many attempts to get working right, but its finally done!

Everyone loves cactuses. Cacti? So i made one into a toothpick holder. It has a built in spring so the spines stick out when you push it down! (If needed, use the Brim print setting to secure the spring if it isn't sticking to the build plate)

These are excellent for storing your toothpicks. They're great for when you host parties and have fruit or meat and cheese boards too!

These work with standard round toothpicks. I just picked up a pack of 500 of them for super cheap from walmart. This cactus takes 117 toothpicks total.

I used a standard 4 inch Terracotta nursery pot for mine. But I included a file to print the pot if you'd like.

Cactus Toothpick holder

Cactus.stl

Spring.stl

1 - Easy Print 3mf - Cactus Toothpick Holder.3mf

Freebie Scorpion.stl

[Instructions](https://prinnit.com/ForgeCore/design/368OKOeKHepdTC2zE27IUmsF8Pr?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/368OKOeKHepdTC2zE27IUmsF8Pr?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/368OKOeKHepdTC2zE27IUmsF8Pr?section=filaments&highlight=filaments)

**Monstera Coasters** - _Beginner_    **Albo Version** - _Intermediate_

The Monstera is a super popular plant with its rather unique style of leaves. I surrounded myself with several different Monstera plants while designing this to make it as realistic as I could.

This Coaster Plant is an excellent way to store coasters, and get some more foliage into your home. Small magnets hold the leaves onto the plant, and they come off easily when you need a coaster. Snapping the leaves back onto the plant is also very satisfying!

There are a few different stem types and leaf types so you can customize your plant how you would like. 

**ForgeCore Freebie**
Check the Easy Print 3mf File for a **Freebie Snail**! A fun little articulating print that pairs well with the Monstera. Or just print on its own!

Monstera Coasters - Classic

Easy Print File - Monstera Coaster Set 3mf.3mf

Albo Leaves.stl

Dirt.stl

Leaves.stl

Stems.stl

Freebie Snail.stl

[Instructions](https://prinnit.com/ForgeCore/design/36829h51Q0szOGsftYuuQlUsMvb?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/36829h51Q0szOGsftYuuQlUsMvb?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/36829h51Q0szOGsftYuuQlUsMvb?section=filaments&highlight=filament)

**Planet Lamps** - _Advanced_

These Planet Lamps make the best lamp to give your room more ambiance. Perfect for kids rooms, gaming setups, bedrooms, using for nightlights, or just for some Space Vibes. They are (almost) all made using real satellite Data from NASA. These took me several years of design iterations to get to where they are now.

Saturn*, Neptune*, Uranus*, and Pluto do not have high quality satellite scans yet to create interesting lamps from, so those models are made using some artistic interpretations to make them look better. When I sold these on Etsy, my customers did not care about that, but if you plan to sell them, its worth mentioning in your description. *These 3 planets were made in collaboration with [Ruven Bals](https://thangs.com/designer/RuvenBals) on thangs.

Planet Lamps

Earth.stl

Jupiter.stl

Light Base - Generic.stl

Light Base - Xstron LEDs.stl

Mars.stl

Mercury.stl

Moon.stl

Neptune.stl

Pluto.stl

Saturn.stl

Sun.stl

Uranus.stl

Venus.stl

1 - Easy Print 3mf - Planet Lamps.3mf

[Instructions](https://prinnit.com/ForgeCore/design/368eTQpmHtyoBe1gnedhddgOIKB?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/368eTQpmHtyoBe1gnedhddgOIKB?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/368eTQpmHtyoBe1gnedhddgOIKB?section=filaments&highlight=filaments)

**Desktop Skee-Ball** - _Advanced_ 
Desktop Skee-Ball is not only a super fun desktop game, It's the best way to procrastinate. This is the most fun desktop game I've made so far, and it's definitely the coolest looking as well. It's also very aesthetic and can be printed in colors to match your desk setup. These make great gifts but can also be sold for a profit!

Desktop Skee-Ball

1 - Easy Print 3mf - Desktop Skeeball.3mf

Board and Spring.stl

Clamps.stl

Cover and Fasteners.stl

Machine.stl

[Instructions](https://prinnit.com/ForgeCore/design/36ADxHCjjVdyAJ8QtDeF6zAO3di?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/36ADxHCjjVdyAJ8QtDeF6zAO3di?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/36ADxHCjjVdyAJ8QtDeF6zAO3di?section=filaments&highlight=filaments)

**Desktop Golf** - _Intermediate_ 

This is the perfect game for your desk, and makes an excellent gift for golfers/fathers.

You get to put a ball across your desk. If you make it, Nice Shot! If you miss, no worries, the ball comes right back to you via the return track!

The game attached to a desk or table with screws. This works best for desks that are not up against a wall.

This took me a long time to perfect and it is SUPER fun to play. It is a little more complicated to assemble but I promise its worth it!

Desktop Golf

1 - Easy Print 3mf File - Desktop Golf.3mf

Flag Pole.stl

Flag.stl

Putter.stl

Putting Green.stl

Tee Box & Screws.stl

Universal Putting Green.stl

[Instructions](https://prinnit.com/ForgeCore/design/3686fetd734Ovs5FwP8G0Ub3udv?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/3686fetd734Ovs5FwP8G0Ub3udv?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/3686fetd734Ovs5FwP8G0Ub3udv?section=filaments&highlight=filaments)

**Desktop Basketball** - _Beginner_
Desktop Basketball is a super fun way to pass the time when you need a break from your work. It works with any standard ping pong ball and can adjust to fit any size desk.

Desktop Basketball

1 - Easy Print 3mf - Desktop Basket Ball.3mf

Back Board.stl

Clamp.stl

Net.stl

Pole.stl

Rim.stl

[Instructions](https://prinnit.com/ForgeCore/design/3683JeViEoNULOpCCRSTGXTmhaQ?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/3683JeViEoNULOpCCRSTGXTmhaQ?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/3683JeViEoNULOpCCRSTGXTmhaQ?section=filaments&highlight=filaments)

**Desktop Bowling** - _Advanced_
Desktop Bowling makes a great addition to your desk! It looks super cool to have a little bowling alley on your desk, and It's fully functional! The pins can be reset by pulling a string.

The Launcher is optional. You can roll the ball with your hand, but the launcher adds another layer of skill.

Desktop Bowling

1 - Easy Print 3mf - Desktop Bowling.3mf

Alley Lid.stl

Alley.stl

Bowling Pins.stl

Launcher and Ball Return.stl

Track.stl

Inspired by the artistic figures made with the wire technique, I tried to create these flowers by trying to give creativity to the shapes that form them, playing with perspective.

The petals unfold playfully and spontaneously, the delicate stems intertwine harmoniously, the delicate, curved leaves embrace the flowers as if in a tender embrace 🌼

The same flower, viewed from the side, reveals a different and new perspective and form. The thread is woven in such a way that it can somehow give the impression of representing a face (have an open and creative mind and you will see it).

Let me know if you are interested in having more designs like this!
- - -
**This design is not the easiest or the most immediate to print, and requires several precautions to ensure success.**

_Let's just say it can be used as an excellent stress test for both the printer and you, haha.
But don't worry, if I can do it, so can you!_

**Please read carefully the File Tips.txt file before printing it, I have written some tips for it.**
- - -

**If you have any questions or inquieries about the files, if you have any suggestions and requests, or anything else, please don't hesitate to let me know!**

- - -

Please don't be shy and upload your make!

(_If you share it on your socials, please be sure to tag : @randomizy.3d [FB / IG] ; @randomizy3d [Twitter / Tik Tok] so that I can see it!_)

- - -

**INSTAGRAM:** https://www.instagram.com/randomizy.3d/

**TWITTER:** https://twitter.com/Randomizy3D

**FACEBOOK:** https://www.facebook.com/randomizy.3D

**Check More Here:** https://linktr.ee/Randomizy

- - -
_If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please do consider joining my Membership here:_ https://than.gs/u/296962?plans=true

Abstract (Line) Flower

Abstract (Line) Flower.stl

**Description:**
This nightstand organizer | desk organizer allows you to always have your mostly used items such as your phone, wallet, and AirPods sorted and within reach.

The implemented phone holder is ideal for use as an alarm clock, but can also contribute to simplified operation of the phone on the desk.

The design is simple and elegant, making the organizer not only practical but also an eye-catching piece.



**Print settings:**
I suggest printing this model with the following settings:

Layer height: 0.2mm
Print speed: 100-300mm/s (Start off rather slow to avoid warping issues)

(These settings are a guideline. You might want to figure out what works best for your printer/filament.)



**Assembly:**
The individual components can be plugged/pushed together. Optionally, superglue can also be used to make it more durable.



_HAVE FUN ORGANIZING!_

NIGHTSTAND ORGANIZER | DESK ORGANIZER

MDO_Assembly.stl

This monstrous mimic box has a flexible tongue that's optional. It just needs to be glued in. The teeth are printed separately and glued in the place. All teeth are numbered, so there's no mixing them up. The box is connected together with a single piece of 1.75 filament. you just have to melt it on the ends to keep it in place. There is space for 3x2 mm magnets. Like most of my stuff, easy painting is kept in mind when designing. But unfortunately, I could not make the eyes separate in maintaining the goofy eyeball look that I wanted. That being said, I printed in a nice satin black and paint on the desired color and then go back and touch up the eyes easy enough. But for those that own a bamboo and an AMS, there are fully painted files for you set up to print five boxes at a time.

Googly-eyed mimic box with flexible Tongue

MIMICfull set x5.3mf

**A real Pineapple turned organizer. Store jewelry, candy or whatever you like in this extraordinary Ananas.**

The design comes in two version. One simple storage container (A) and one where every level has its own slice-like containers for elaborate organization (B). 

**Instructions A**
- Print all three parts
- Glue the green into the top

**Instructions B**
- Print all parts once except for the compartments. You need 5 of them each.
- Glue the rod into slice 1
- Insert slice 2,3 and 4
- Glue the green into slice 5
- Insert slice 5 onto the rod – you should use glue here but be aware that you will not be able to disassemble it afterwards.

The slices lock into position. The only open to one side. Do not try to force them to open to the other side or you might damage the object.

Size assembled: 126 x 126 x 321 mm

**Print settings**
Required build volume: 150 x 150 x 190 mm
Material usage A: 400 g
Material usage B: 650 g

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Infill: 15%
Build plate adhesion type: none

Sliced Pineapple

green.stl

A_bottom.stl

A_top.stl

**BLOB GECKO**

This cute flexi gecko can stick to your fridge and look around. Make sure your gecko gets enough sun by bathing on it's rock!

- flexible legs and tail
- articulating head
- magnetic feet and hidden/no magnet version
- print-in-parts and multicolor files included
- bonus rock container

**PERSONAL USE ONLY**

Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to [patreon.com/bloblab](https://www.patreon.com/bloblab "patreon.com/bloblab")

**COPYRIGHT PROTECTED FILES**

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

**PRINT INSTRUCTIONS**

- 2mm standard layer height
- no supports
- brim recommended
- 3x8mm magnets fit 100% scale, they should press fit, but may need glue depending on your printer. For the hidden magnet version, right click on your slicer timeline and "add stop" at the 4mm mark to place your magnets.
- eyes snap in head, head snaps on body

Blob Gecko - Flexi Magnetic Art Toy with Rock

Blob Lab Gecko All 5.3mf

I think this is the world’s first… a gimballed 3D printable wine glass holster for those who like to keep their wine with them hands-free.   It is basically a companion to my beer holster (BevvySteady3) but unlike the offset-gimbal of that design, this one is centre-gimballed and includes 2 additional axes for greater mobility.  

100% printed - no hardware, fasteners, or adhesives required.  No additional support is required.  It is a print-in-place and snap-together design.  

How I print it:
Material = I recommend PETG but any material should work.  
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Infill = 40%

Commercial Licensing is available through my Thangs Memberships.

I welcome requests, suggestions and ideas to help make this and all my products better.  Please send me a message any time.

But please be sure to check out the documentation including instructions and print settings on my blog at 
https://logicalplanet.com/

You might also be interested in my BevvySteady for beer located here...
https://than.gs/m/1002137



BevvySteady Wine - Gimballed Wine Glass Holder

BSW 100d_BSW E - Cup 96mm.stl

A fun, hide-in-plain-sight, hiding spot for cash, documents, keys, credit cards, etcetera.  This is a full-size clothes hanger with a snap-on storage box which becomes hidden under the garment on the hanger.  Prints in a 220mm x 220mm bed.

100% printed, snap-together - no hardware, fasteners, or adhesives required.  No support is required.  

Recommended Print settings:
Material = Any, I use PETG.
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Infill = 40%

Commercial Licensing is available through my Thangs Memberships. 

I welcome requests, suggestions and ideas to help make this and all my products better.  Please send me a message any time.

StashHanger

StashHanger 1v00_StashHanger.stl

The RagTag2 hooks onto your waist or pocket and holds a towel, rag or cloth so that you have it handy whenever you need it whatever you are doing. The RagTag2 will pivot and swivel to allow easy use of your towel without it releasing so the towel stays with you. However, if you need it to release you can pull the towel up and out of the RagTag2 or pull assertively on the towel and the RagTag2 will release.

100% printed - no hardware, fasteners, or adhesives required.  No additional support is required.

Print Settings:
 
Material = I recommend PETG but any material should work.  
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Infill = 40%
Ironing = ON (recommended but not critical)

Commercial Licensing is available through my logicalplanet Memberships here on Thangs.  I will customize and provide commercial support to members on request.

I am committed to helping everyone get great print results to the extent I can so please contact me if you are having issues I enjoy trying to help resolve those challenges.  I welcome requests, suggestions and ideas to help make this and all my products better.  Please send me a message any time.  

See my blog for more details and other product info… 
https://www.logicalplanet.com/


RagTag2 Towel or Rag holder for chefs and barbecuers

RagTag2 2v00b main.stl

Prepare to win spooky season with this versatile costume accessory.  These Articulated Skeleton hands can compliment any costume from a simple scarecrow to an intricate Death cosplay.  Your imagination is the limit. Please share your pictures and makes with me, I can't wait to see what the maker community does with these. Trick or treat!

Assembly Video Included https://youtu.be/hsUhI70vuCc

PLEASE READ BEFORE DOWNLOADING:  Please check out the assembly video before you download to make sure you are up to the task.  There are two different pre scaled files for general sizing that you will need to add supports to. These claws are designed for a mid-large hand, one size fits MOST.  You may need to pad the inside for smaller hands. Claws have been test printed scaled down to 80 percent and up to 110 percent.  Assembly video included.  There is an optional harness that can be printed and used with any 3/8 in elastic for a more custom fit.  An easy way to check the sizing is by scaling and printing only the bottom ring file until it fits around your finger. Once your finger/thumb size is correct print the full assembly file in that scale. This will help determine the correct sale for your hand.

Articulated Skeleton Hands

Skeleton FINGER  FULL.stl

Hello, dear Supporters!
I'm excited to share with you the latest 3D model that I've created for you. It's a **Flame SteamDeck Dock**, a stylish and functional accessory for your gaming device.

This dock is designed to fit your SteamDeck snugly, even if you have a slim sleeve on it. Perfectly print-in-place - No need for any support material. Just load the STL file and start printing!

The dock also has a cable notch at the back, so you can secure the power cable when you're not using it. This way, you can keep your desk tidy and organized.

My recommended settings are:
- For a fast print: Use lighting infill at 35% and 3 walls.
- For a more robust print: Use cubic infill at 15% and 2 walls.

Filaments:
White print: Overture Matte White
Gradient Blue print: Ziro Translucent PLA Winter
Iridescent Grey print: Polymaker Starlight PLA Mercury

SteamDeck Flame Dock

SteamDeck_Dock_Flame-Holoprops.stl

____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________
Files to print Dolly Cosplay Hand and Fingers. The supports required. Some parts need to be printed multiple times (file names contain the approximate quantity).
Ready for ENDER 3 v2 or similar 220x220x250mm size printer.


Weight without supports: 50g/5% infill
This item comes with our Personal Use Only Licensing. This means you may not share this model or use it for any commercial purposes or in any way that involves an exchange of money, promotes a business entity, or otherwise results directly or indirectly in financial gain. Printing of this file for sell or resell is prohibited. If you need a commercial license, contact the author.

If you encounter any problems with the model you're more than welcome to get in touch.
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________

Dolly Cosplay Hand and Fingers 

HandGEO-body_female_realistic_001.stl

I created a cabbage life counter for the upcoming Magic the Gathering set Avatar the Last Airbender. 
This requires supports and is best with printer that can print in color because the lettering is likely to small to paint. It also requires 4-8mmX2mm round magnets. They will need to be glued into the 3 cabbage pieces. I glued the magnets in starting with the middle piece. Let that dry and then glue in the other 2 magnets when you know the correct way to align the magnets. 

Let me know what other MTG accessories you would like to see for this set. 

Cabbage Life Counter

Cabbage Bottom Life Counter 3mf.3mf

Stylized Dragonfly Pendant – Minimal Elegant Insect Design

A stylized dragonfly pendant design with smooth flowing lines and a graceful loop-tail form. This model is a single 3D print how you want to use or finish it is completely up to your creative direction.

Print it as a small charm, experiment with metallic paint, UV-resin coating, or plating techniques for a jewelry-like finish.

**Features**
Minimal, elegant dragonfly design
Smooth organic shapes for easy finishing
Ideal for resin prints or fine-tuned FDM

Perfect for metallic effects and glossy finishing.

**Tip:** Use a thin UV-resin base coat to fill layer lines. Cure, sand lightly if needed, then paint for a flawless, premium finish.

Can be scaled.

🔹 Personal use only.
🔹 Commercial use is exclusive to members



Stylized Dragonfly Pendant 

Dragonfly.stl

 
### **Ferdinand the Highland Cow Ice Pint Holder 🐮❄️**

Meet **Ferdinand the Highland Cow**—the coziest way to enjoy your ice-cream nights! With his fluffy fringe, sweet smile, and curved horns, Ferdinand keeps your hands warm while your ice cream stays perfectly chilled. Designed to hug most 473 ml / 16 oz pints (Ben & Jerry’s, Häagen-Dazs, and more), he’s both adorable and practical.

✨ **Choose Your Style:**
• 🍦 **Standard Cow (with Drawer):** Hidden tail drawer for sprinkles, cookies, or sweet surprises
• 🚀 **Slim Cow (no Drawer):** Sleeker, faster-to-print version with all the Highland charm
 • 🌈 **Multicolor Option:** Available for both versions for extra personality straight off the printer
 
---

😊 **Why You'll Love It:**
- 🐮 Instantly charming Highland cow look with shaggy texture & friendly eyes
- 🧊 Keeps your ice cream cold while protecting your hands from the chill
- 📏 Perfect fit for standard pints (Ben & Jerry’s, Häagen-Dazs, etc.)
- 🥄 Built-in spoon slots—share or keep it all for yourself
- 🖨️ Single-color model, can be printed on any machine
-  🎁 Makes the cutest gift for cow lovers, foodies, or party fun

---

📐 **Quick Specs:** Fits 473 ml / 16 oz ice cream pints (92 mm top | 82 mm bottom | 92 mm deep)

---


🎨 **Filament Used:**  
Caramel Beige ([Get it](https://shrsl.com/4x83l)) • Desert Tan ([Get it](http://shrsl.com/4xcnx  )) • Pink ([Get it](http://shrsl.com/4xhj3)) • Black ([Get it](https://shrsl.com/4whua)) • White ([Get it](https://shrsl.com/4wht2))

---

📋 **Print Settings:** See included README.md for detailed instructions

---

🎯 **New to 3D Printing?** Perfect prints guaranteed → [Start Here](https://than.gs/p/250559)


Ferdinand, the Highland Cow Ice Pint Holder

99_PintPal_HighlandCow_nodrawer_multicolor.3mf

99_PintPal_HighlandCow_drawer_multicolor.3mf

1_PintPal_HighlandCow_noDrawer_mainbody.3mf

1_PintPal_HighlandCow_wDrawer_mainbody.3mf

2_PintPal_HighlandCow_details_beige_deeperHorn.3mf

3_PintPal_HighlandCow_multicolor_eyes.3mf

3_PintPal_HighlandCow_singlecolor_eyes_raised.3mf

4_PintPal_HighlandCow_details_pink.3mf

**CHOIS System: You Choose, You Make.**

Turn standard wooden dowels from any hardware store into 
premium modular furniture — no glue, no screws, no special tools.
Inspired by minimalist Japan Design, built for real life.

This Starter Kit is the foundation of the CHOIS system.
Build a beautiful freestanding valet stand for your entryway 
or bedroom. Minimalist. Solid. Designed in Japan.

---

📦 **WHAT'S INCLUDED**

• 10 STL files — all parts for the complete Valet Stand build
• 3MF project file — pre-configured with recommended print settings
  (Bambu Studio)
• PDF assembly guide (English & Japanese)
• Calibration test ring — print this first to check your rod fit

---

🪵 **WOODEN DOWELS (Not Included)**

Available at any home center or hardware store.

• Ø32mm (Japan / Europe) or 1-1/4 inch (US / Canada)
• Suggested cut list (total height approx. 1550mm):
  – 1× vertical pillar: 1100mm
  – 3× legs: 450mm
  – Cut to any length to fit your space.
• Only have Ø30mm rods? Download our free 30mm adapter 
  separately from our profile.
• Oak or walnut gives an instantly premium, high-end look.

---

⚙️ **PRINT SETTINGS**

• Min. build volume: 180 × 180 × 180mm
  (Compatible with Bambu Lab A1 mini, Prusa MINI+)
• Material: PLA or PETG
  PLA works perfectly for most home environments — 
  it's what we use ourselves.
  If your space gets very warm in summer (near windows, 
  direct sunlight, or hot climates), PETG adds extra peace of mind.
• Almost support-free — supports required for Hanger Wing only.
• Full recommended settings are included in the 3MF file and PDF guide.

---

📝 **NOTES**

• Designed for everyday items: coats, hats, and bags.
• Natural wood expands and contracts slightly over time.
  If joints feel loose, simply push the wedges further in — 
  no tools needed.
• Use on a flat, stable surface.

---

🔗 **EXPAND YOUR CHOIS SYSTEM**

Add hooks, trays, and more from our profile.
New parts added regularly — stay tuned.

---

© **LICENSE**

Personal use only.
Commercial printing and resale requires 
an active Merchant subscription.
→ Details on our profile page.

---

**〇Recommended Wood Dowels (1-1/4 inch / 32mm) — US Amazo**n

These work perfectly with the CHOIS 32mm joints:

・[Birch Round Dowel](https://amzn.to/4tz2XZR)
・[Oak Round Dowel](https://amzn.to/48n49qO)
・[Walnut Round Dowel](https://amzn.to/4vTmEgI)
This is an affiliate link. You pay the same price — I earn a small commission if you purchase through it. Thank you for your support!

---

📸 Tag us: #CHOISsystem #youchooseyoumake

CraftedCycle — Designed in Japan

CHOIS Valet Stand | Modular Furniture Starter Kit

02_CHOIS_MainJoint_Standard_32-4mm.stl

To buy

Thangs Bundle

EW Standard Projects

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

Erik-Thangs