I was tired of chasing my solder tips all over when they rolled behind the solder station so I made this. Fits the Hakko-style 6mm diameter bodies.

Solder Tip Holder

soldertip_holder-BodyLinearPattern.3mf

Yet Another thing in an Altoids tin. I made this with some fillets on the bottom to aid in getting stuff out. I find that having a little "scoop" at the bottom of a cavity makes it way easier to slide small things up and out.

Fish hooks in an Altoids tin

altoids_fish_hook_keeper.stl

The solid model is just a plain divider, in case you need extras. You can print it with no bottom or top layers and a 30-ish% honeycomb infill to make a fancy version that allows for some airflow for your wet lures. 

Basic Divider for Plano 3600 Tackle Box

custom_divider-basic.stl

These are some extra dividers for the Plano 3600 (really common in fishing gear bags). This one is a slotted model that I intended for leaders and such.


Leader holder for Plano 3600 tacklebox

custom_divider-leader_holder.stl

I made this to complement the [Gridfinity Aneng DMM holder](https://thangs.com/designer/markersniffen/3d-model/Gridfinity%20Multimeter%20holder-184802)

The four holes are there to hold either bare-ended probes or hooks. The probes do poke out the back so you won't be able to put another gridfinity widget behind it.

This is designed to fit my [Probemaster 8000](https://probemaster.com/8000-series-standard/) probe set. I am fully aware of the irony of a set of probes costing more than the DMM but here we are.

The bottom has cavities to glue in US (or Canadian) quarters to add some weight, lest the probes tip it over. If you use magnets with your gridfinity boxes, you probably don't need it.

I've uploaded the FreeCAD source file if you would like to adjust anything. It is a combination of my part and a mesh model for the base. 

Gridfinity DMM Probe Holster

I made this to complement the Gridfinity Aneng DMM [holder](https://thangs.com/designer/markersniffen/3d-model/Gridfinity%20Multimeter%20holder-184802)

The four holes are there to hold either bare-ended probes or hooks. The probes do poke out the back so you won't be able to put another gridfinity widget behind it.

The bottom has cavities to glue in US (or Canadian) quarters to add some weight, lest the probes tip it over. If you use magnets with your gridfinity boxes, you probably don't need it.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Dielectric

Achievements

Seedling

Debutant

Voyager

Solder Tip Holder

Fish hooks in an Altoids tin

Basic Divider for Plano 3600 Tackle Box

Leader holder for Plano 3600 tacklebox

Gridfinity DMM Probe Holster