Caleb S
Caleb S

CPAP Clamp v1.stl

by
Dettweiler
Dettweiler
Follow
Dettweiler
Dettweiler
|
Image 1 of 3
CPAP Clamp v1.stl 3d model
Dettweiler
Dettweiler
|
Image 1 of 3
CPAP Clamp v1.stl 3d model
2D
3D
Makes
CPAP Clamp v1.stl 3d model
CPAP Clamp v1.stl 3d model
CPAP Clamp v1.stl 3d model

CPAP Clamp v1.stl

A hose clamp designed primarily for the F30i CPAP mask, but will work for any ResMed mask/hose combo where this may apply. This will also likely work with any standard ~18 mm strap and ~19 mm dia hose.

No supports needed. Use the front or back of the hose clamp as the print bottom.


2 Likes18 DownloadsOctober 7, 2024

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density20 %
SupportsNone
BrimNo