Non Contact Probe Mount [TPU Recommended]

Probe Mount STL.stl

Parametric ABXY Buttons - Ergo Style [Alpakka Compatible]

5. Ergo Style Sample.stl

Parametric ABXY Buttons - Bullet + Fillet Style [Alpakka Compatible]

4. Bullet Style Sample.stl

Parametric ABXY Buttons - Input Labs Style [Alpakka Compatible]

1. InputLabs Style.stl

Minimalistic Bird Sculpture

Bird Toy.stl

Parametric Analogue Stick Mod - Alpakka Compatible

1.1 Xbox Style [Short Height + Thick Shaft] .stl

Alpakka Ridge Thumbstick Variant

Recessed Ridges Tall Stick Thick Base

Alpakka Dimpled Thumbstick Variant

Recessed Dimple Short Stick Thick Base

Thumb Cap Compatible Alpakka Analogue Stick Mod

Tall Length Thick Base.3mf

Protective Case [Compatible with Samsung 20 000mAh Battery Pack]

2X Top & Bottom TPU Ring.stl

AA Travel Battery case

AA Travel Battery case

Case: PLA or PETG
Top Cover: TPU

AA Battery case .stl

Coral Experiment #1.stl

**Coral Experiment #1**

Testing out some new techniques and sharing a fully 3D printable coral fungus like growth structure

**Recommended Print Settings**
Nozzle: 0.4
Layer Height 0.16
Supports: N/A
Raft/Brim: N/A

[If you would like to follow behind the scenes and take part in an awesome community of makers, you can join my community discord channel here: Operation Anvil](https://discord.gg/x6Kyz8tNQ3)

===============================

This model is intended for personal use only
No selling, reselling or repackaging of the original / modified files or 3d printed models for commercial gain.

**You are free to:**
**Share** — copy and redistribute the material in any medium or format

The licensor cannot revoke these freedoms as long as you follow the license terms.

**Under the following terms:**

**Attribution** — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

**NonCommercial** — You may not use the material for commercial purposes.

**NoDerivatives** — If you remix, transform, or build upon the material, you may not distribute the modified material.


Alpakka Flat Stick Mod.stl


**DESCRIPTION**
Input Labs Alpakka Flat Analogue Stick Mod [V1]

Inspired By [Steam Deck Flat Stick Mod](https://www.youtube.com/watch?v=kEPB2U23h44)

**Recommended Print Settings**

Nozzle: 0.4mm
Layer Height: 0.07mm [Trust me, the extra quality helps]
Walls: 3
Infill: 15% Triangle Pattern
Supports: required
Support Z gap with 0.07mm Z height: 0.14

Make sure you have good bed adhesion, otherwise use a Raft

Let me know if you have any issues or would like to see more Mods

Please check out and support the amazing creators at [Input Labs]([https://inputlabs.io/])

**Check out my profile [here]**(https://thangs.com/designer/Dennis%20The%20Menace)

Happy Printing

Alpakka Taller ABXY + Dpad Buttons Mod [V1]

abxy_4x. 1.5mm Longer.stl

Alpakka Looser Triggers Mod [V1]

**Input Labs Alpakka Looser Trigger Mod [V1]**

Slight Tolerance and model improvements to allow looser fit.

Recommended Print Settings

Nozzle: 0.4mm
Layer Height: 0.07mm [Trust me, the extra quality helps]
Walls: 3
Infill: 15% Gyroid Pattern
Supports: Not required

Recommended Experimental feature: Maker overhangs Printable and set to 60 degrees max overhangs.

Let me know if you have any issues or would like to see more Mods

Please check out and support the amazing creators at [Input Labs]([https://inputlabs.io/])

Check out my profile [here](https://thangs.com/designer/Dennis%20The%20Menace)

Happy Printing 

trigger_R1_2x_mirror_Looser .3mf

Alpakka Shorter Joystick Mod [V1]

**Input Labs Alpakka Thumb stick Mod [V1]**

3.5mm shorter than the stick version , i designed it to be similar height as the Xbox One  controller's sticks.

Recommended Print Settings

Nozzle: 0.4mm
Layer Height: 0.07mm [Trust me, the extra quality helps]
Walls: 3
Infill: 15% Gyroid Pattern
Supports: Not required

Recommended Experimental feature: Maker overhangs Printable and set to 60 degrees max overhangs.

Print with cap Facing down and make sure you have good bed adhesion, otherwise use a Raft

Let me know if you have any issues or would like to see more Mods

Please check out and support the amazing creators at [Input Labs]([https://inputlabs.io/])

Check out my profile [here](https://thangs.com/designer/Dennis%20The%20Menace)

Happy Printing 

thumbstick_1x_shorter_+_thicker_[V1] .3mf

Just sharing my love and passion for **computational design and digital fabrication** with the world!

Please **consider following** & Let's build something awesome together!

[Sneak a peak behind the scenes](https://discord.gg/x6Kyz8tNQ3) and take part in an awesome community!  Look no further! Join our growing [Discord Community](https://discord.gg/x6Kyz8tNQ3)  and mingle with makers from all around the world!

If you like what i do , find it useful, or just want to help keep the lights on, i kindly encourage you to checkout my  [Ko-Fi](https://ko-fi.com/deanzyne)


Deanzyne

Achievements

Seedling

Trailblazer

Up and Coming