DaveMakesStuff

Gyroid Sculpture #2

by
DaveMakesStuff
Follow
Follow
Remix Model
DaveMakesStuff
DaveMakesStuff
|
Image 1 of 4
Gyroid Sculpture #2 3d model
DaveMakesStuff
DaveMakesStuff
|
Image 1 of 4
Gyroid Sculpture #2 3d model
2D
3D
Makes
Gyroid Sculpture #2 3d model
Gyroid Sculpture #2 3d model
Gyroid Sculpture #2 3d model
Gyroid Sculpture #2 3d model
This model is restricted by licensing terms. 

This sculpture is part of a series of three sculptures derived from the gyroid triopoly periodic minimal surface. Cube edges are one and a half unit cells with a length of approximately 90mm.

See here for video: https://youtu.be/p2jIglnMS3s

Files are provided plain and with custom supports. Be aware that the custom supports may or may not be optimized for your particular printer, slicer and materials.

Gyroid Sculpture #1: A single gyroid surface in Voronoi pattern. Voronoi structures are approximately 3mm in diameter.

Gyroid Sculpture #2: Two offset gyroid surfaces: one solid, the other in Voronoi pattern. Voronoi structures are approximately 3mm in diameter. Mathematically, these are separate surfaces that weave around each other but do not touch. In this model there are small bridges hidden within the structures that connect the two surfaces together for structural purposes. If desired, the surface shells can be separated for dual colour printing.

Gyroid Sculpture #3: Two solid offset gyroid surfaces connect with randomly place “wormholes.” The wormhole openings are approximately 7.5mm in diameter.

See here for other sculptures based on the gyroid “cubes”: Gyroid Sculpture #1: https://thangs.com/mythangs/file/66609 Gyroid Sculpture #2: https://thangs.com/mythangs/file/66613 Gyroid Sculpture #3: https://thangs.com/mythangs/file/66614 Gyroad Sculpture: https://thangs.com/mythangs/file/66949


32 Likes183 DownloadsMay 12, 2022



32 Likes183 DownloadsMay 12, 2022
This model is restricted by licensing terms.